14-4 FRONT AND REAR BRAKES
• Remove the reservoir cap.
• Connect a transparent tubę to the bleeder valve and set the other end into a receptacle.
• Pour brake fluid up to the UPPER linę.
• Pump the brake lever/pedal until air bubbles stop coming out from the reservoir.
• Hołd the brake lever/pedal in the squeezed position.
• Open the bleeder valve and tighten the bleeder valve.
• Release the brake lever/pedal.
• Repeat this sequence until air bubbles stop coming out from the bleeder valve.
NOTĘ:
Do not release the brake lever/pedal while the bleeder valve is opened.
• Replenish brake fluid to the UPPER linę when the brake fluid level drops below LOWER linę.
• Tighten the air bleeder valve.
H Air bleeder valve: 7.5 N-m (0.75 kgf-m, 5.5 Ib-ft)
• Pour brake fluid up to the UPPER linę.
• Reassemble the reservoir cap.
• Remove the reservoir cap. (d/^aboye)
• Connect a transparent tubę to the bleeder valve and set the other end into a receptacle. (d/^aboye)
• Loosen the bleeder valve and pump the brake lever/pedal until brake fluid stops coming out from the bleeder valve.
• Pour brake fluid into the reservoir.
• Bleed air from the brake system, (d/^aboye)
• Reassemble the reservoir cap.