suziki rm125
56

15-4 FRONT AND REAR BRAKES

•    Remove the reservoir cap.

•    Connect a transparent tubę to the bleeder valve and set the other end into a receptacle.

•    Pour brake fluid up to the UPPER linę.

•    Pump the brake lever/pedal until air bubbles stop coming out from the reservoir.

•    Hołd the brake lever/pedal in the squeezed position.

•    Open the bleeder valve and tighten the bleeder valve.

•    Release the brake lever/pedal.

•    Repeat this sequence until air bubbles stop coming out from the bleeder valve.

NOTĘ:

Do not release the brake lever/pedal while the bleeder valve is opened.

• Replenish brake fluid to the UPPER linę when the brake fluid level drops below LOWER linę.

•    Tighten the air bleeder valve.

H Air bleeder valve: 6.0 N-m (0.6 kgf-m, 4.

•    Pour brake fluid up to the UPPER lin^

•    Reassemble the reservoir

BRAKE FLUID REPLACEMENT

•    Remove the reservoir cap. (d/^aboye)

•    Connect a transparent tubę to the bleeder valve and set the other end into a receptacle. (d/^aboye)

•    Loosen the bleeder valve and pump the brake lever/pedal until brake fluid stops coming out from the bleeder valve.

•    Pour brake fluid into the reservoir.

•    Bleed air from the brake system, (d/^aboye)

•    Reassemble the reservoir cap.