14-6 FRONT AND REAR WHEELS
• Place the motorcycle on a błock to lift the rear wheel off the ground.
• Remove axle nut ® and washer d).
• Remove the rear axle shaft (D and Chain adjuster washers
• Disengage the drive Chain.
• Remove the rear wheel.
WHEEL SPACER
• Inspect the rear wheel spacers and(dust seals fc cracks.
• If any damage is found, replace the spacer together with the dust seal.
NOTĘ:
Apply grease on the spacer and Wst seal before reassembling.
AXLE SHAFT ((T7M4-3)
IB Axleshaft runout
Service Limit: 0.25 mm (0.010 in)
WHEEL RIM (1^14-4)
Ifflaja Service Limit: 2.0 mm (0.08 in)... axial and radial
WHEEL BEARING ((T7M4-4)