25871 Suzuki RM1257
FRONT AND REAR WHEELS 14-3
FRONT WHEEL
REMOVAL
♦ Place the motorcycle on a błock to lift front wheel off the ground.
♦ Remove the axle nut ©.
♦ Loosen the left axle holder bolts (2).
* Loosen the right axle holder bolts ®.
* Remove the front axle shaft
* Rernove the front wheel.
..............— — % \ n •. \ \
♦ Inspect the right and left wheel spaóęrs ahd.dust
wear and cracks. _ \ \\ \ \ V\„.)
♦ lf any damage is foun0-,-replace the.spacer together with the
----- i ! U"
Apply grease to the spacer and dust seal before reassembling.
AXLE SHAFT
* Support the axle shaft with the V-blocks and measure the axle shaft runout.
BI Axleshaft runout
Service Limit: 0.25 mm (0.010 in)
09900-20607: Dial gauge (1/100 mm) 09900-20701: Magnetic stand 09900-21304: V-block set (100 mm)
INSPECTION
SPACER AND DUST SEAL
dust seal. NOTĘ:
Wyszukiwarka
Podobne podstrony:
Suzuki RM1250 14-6 FRONT AND REAR WHEELSREARWHEEL REMOVAL • Place the motorcycle
suziki rm12547 FRONT AND REAR WHEELS 14-3FRONT WHEELREMOVAL • Place the motorcycl
suziki rm12550 14-6 FRONT AND REAR WHEELSREARWHEELREMOVAL • Place the motorcycle
suziki rm12571 16-4 FRONT FORK AND STEERINGFRONT FORKREMOVAL • Place the motorcyc
80817 Suzuki RM1252 TRANSMISSION AND CRANKSHAFT 10-3ENGINE BOTTOM SIDE ♦ Dismount
27882 Suzuki RM1255 FRONT AND REAR WHEELS 14-1FRONT AND REAR WHEELS -CONTENTS CONSTRUCTłON
Suzuki RM1259 FRONT AND REAR WHEELS 14-5 Apply grease to the bearings. Reassemble the bearings and
Suzuki RM1251 FRONT AND REAR WHEELS 14-7BEARING REPLACEMENT • Remove the dust seals with the specia
suziki rm12549 FRONT AND REAR WHEELS 14-5 FRONT AND REAR WHEELS 14-5 R “1322” (Others) • &nbs
suziki rm12551 FRONT AND REAR WHEELS 14-7BEARING REPLACEMENT • Remove the dust seals with the speci
suzuki rm25028 FRONT AND REAR WHEELS 13-3FRONT WHEEL REMOVAL ANDREASSEMBLYFRONT WHEEL REMOVAL • &nb
więcej podobnych podstron