Suzuki RM250„

Suzuki RM250„



TRANSMISSION AND CRANKSHAFT 8-11

TRANSMISSION AND CRANKSHAFT 8-11


INSTALLATION

Install the crankshaft and transmission in the reverse order of removal. Pay attention to the following points:

CRANKSHAFT

♦ Jnstall the crankshaft into the left crankcase haJf with the spe-cial tool.

09910- 32812: Crankshaft installer

09911- 11310: Attachment

NOTĘ:

Do not hit the crankshaft with a hammer for installation.

TRANSMISSION


V"


s


3 \Cro


NOTĘ:

Seat the snap ring in the groove and iocate its end as shown in the iilustration.

•    Insert the driveshaft and countershaft with gears installed.

•    Apply transmission oil to the following parts:

Driveshaft    Countershaft

Transmission gears    Bearings

Gearshift forks    Gearshift shafts

Gearshift cam

Sharp edge




Wyszukiwarka

Podobne podstrony:
41739 Suzuki RM250? 8-8 TRANSMISSION AND CRANKSHAFT 8-8 TRANSMISSION AND CRANKSHAFT BE5II B55IICRAN
80733 Suzuki RM250? TRANSMISSION AND CRANKSHAFT 8-13 ♦ Reassemble the primary drive gear and washer.
Suzuki RM250? TRANSMISSION AND CRANKSHAFT 8-9 TRANSMISSION AND CRANKSHAFT 8-9 m—w iee*CRANK CASEOIL
42985 Suzuki RM250? TRANSMISSION AND CRANKSHAFT 8-7 ♦ Inspect the gearshift cam groove for abnormal
suzuki rm25043 FRONT AND REAR BRAKES 14-11 FRONT AND REAR BRAKES 14-11 Use only DOT4 brake fluid fr
Suzuki RM2502 FRONT AND REAR WHEELS 13-7REAR SPROCKET REPLACEMENT ♦ Tighten the nuts to the specifi
65270 Suzuki RM2505 FRONT AND REAR BRAKES 14-3BRAKE FLUID AIR BLEEDING â–² WARNING Brake fluid can be
74347 Suzuki RM2501 FRONT AND REAR BRAKES 14-9CALIPER CLEANING *    Flush the calipe
44367 Suzuki RM2505 COOLING SYSTEM 10-3COOLING CIRCUIT INSPECTIONCOOLING CIRCUIT Before removing th
suzuki rm25026 FRONT AND REAR WHEELS 13-1FRONT AND REAR WHEELS -CONTENTS- CONSTRUCTION
suzuki rm25028 FRONT AND REAR WHEELS 13-3FRONT WHEEL REMOVAL ANDREASSEMBLYFRONT WHEEL REMOVAL • &nb
suzuki rm25030 FRONT AND REAR WHEELS 13-5WHEEL BEARING INSPECTION •    Turn the inne

więcej podobnych podstron