80733 Suzuki RM250�

TRANSMISSION AND CRANKSHAFT 8-13

♦ Reassemble the primary drive gear and washer.

NOTĘ:

The washer is directional. Assemble the washer as shown in the illustration.

•    Install the magneto rotor and stator. (d/*7-4)

♦    While holding the magneto rotor with the special tool, tighten the primary drive gear bolt © to the specified torque.

H Primary drive gear bolt: 70 N-m (7.0 kgf-m, 50.5 Ib-ft)

GEARSHIFT LINKAGE

♦ Fit the gearshift cam piąte.

NOTĘ:

Align the gearshift cam piąte holę mth the pin

i

* •

■c-y

*    Tighten the gearshift cam bolt ®.

H Gearshift cam bolt: 23.5 N-m (2.35 kgf-m, 17.0 Ib-ft)

*    Apply THREAD LOCK SUPER and tighten the gearshift arm stopper bolt (2) to the specified torque.

tS"0°°-32030: THREAD LOCK SUPER “1303”

♦ Fit the spring pin and pawi to the gearshift cam driven gear. Wider side ® of pawi should be positioned outside.

		j