p55 (3)

32

socket of right lamp. Left, bottom lamp is spore blackout taił lamp. Pług can be inserted in bottom socket of either lamp for blackout taił lamp). SERVICE TAIŁ AND STOP LAMP (Top socket in left taił lamp—two wires in one pług)—Taił lamp cable black wire from switch terminal 2 is for service taił light, and taił lamp cable red wire from switch terminal 7 is for service stop light. Stop light does not operate in daytime when ignition only is turaed "ON."

BLACKOUT MARKER LAMP (ON FRONT MUD-GUARD)—Black wire from switch terminal 1.

. SERVICE HEADLAMP—Black wire with red tracer from handlebar toggle switch (31) to large terminal screw; red wire with yellow tracer from handlebar toggle switch to smali terminal screw.

i. IGNITION-LIGHT SWITCH (TOP VIEW)—Switch "OFF" in straight-ahead position. Turn to first right pos-ition for ignition only; second right position is for ignition and blackout lights. After pressing down lockout button, switch can be turned to third right position for ignition and service lights. Bear in mind that tuming lights "ON" when engine is not running also turns ignition "ON." Switch is provided with lock and key to permit locking, if desired, when motorcycle is not in use. It can be locked only in "OFF" position. When switch is un-locked and motorcycle is in use key should be removed from lock.

27.    BLACKOUT HEADLAMP—Furnished as original equipment with WLA motorcycles having U.S.A. registra-tion numbers 621,317 and higher. When adding this eąuipment to WLA motorcycles with U.S.A. registration numbers below 621,317 install lamp and connect wires according to in-instructions under "Blackout Headlamp Installation," Page 57.

Switch terminal 1 becomes "live" when ignition-light switch is turned to second right position. However, blackout headlamp is fitted with independent switch in lamp body to permit tuming it "OFF" while other blackout lamps are in use.

28.    SPARK COIL—Coil and battery cable green wire from terminal 10 to coil front terminal; green wire from stop lamp switch (20) to coil front terminal; low tension wire (34) from Circuit breaker (33) to coil rear terminal.

29.    HORN—Horn and headlamp cable green wire from terminal 10; black wire from hom switch (30).

30.    HORN SWITCH—Black wire from horn.

31.    HANDLEBAR TOGGLE SWITCH— Black wire with red tracer from serv-ice headlamp terminal with large terminal screw; red wire with yellow tracer to service headlamp terminal with smali terminal screw; red wire

with black tracer from junction terminal 17.

CUT-OUT RELAY—Bed wire with black tracer trom relay terminal of generator to relay rear terminal; generator and relay cable red wire from terminal 3 to relay terminal marked BA1 ; generator and relay cable black wire from terminal 8, to relay right front terminal

33. IGNITION CIRCUIT BREAKER AND TIMER—Low tension wire (34) from coil rear terminal.

³⁴'    BREAKER-TO-COIL LOW TENSION

WIRE—See Description 33.

35. JUNCTION TERMINAL ON BAKELITE TERMINAL PLATĘ (Illustration 44 only)-Hom^nd headlamp cable black wire from switch terminal 1; wire from blackout headlamp (27).

22—i

ILLUS. 44

WIRING DIAGRAM FOR WLA MODEL MOTORCYCLES WITH U. S. A. REG TION NUMBERS 618.025 AND HIGHER. NOTĘ THAT THIS WIRING RA HAS THREE-WIRE CABLE FROM SWITCH TO SERVICE HEADLAMP. BLA

HEADLAMP AND HORN.

55