Suzuki RM125$

PERIODIC MAINTENANCE 2-9

A WARNING

New and used oil and solvent can be hazardous. Chil-dren and pets may be harmed by swallowing new or used oil or solvent. Continuous contact with used engine oil has been found to cause skin cancer in lab-oratory animals. Brief contact with used oil or solvent may irritate skin.

*    Keep new and used oil and solvent away from chil-dren and pets.

*    Wear a long-sleeve shirt and waterproof gloves.

*    Wash with soap if oil or solvent contacts your skin.

NOTĘ:

Recycle or properly dispose of used oif and solvent.

TRANSMISSION OIL LEVEL INSPECTION AND REPLENISHMENT

♦    Place the motorcycle on level ground and hołd the motorcycle

vertically.    _ \ \

♦    Run the engine tor a few minutes and stop it. Wart $ -minutek

♦    Remove the oil level bolt ■©. Check that oil donieś out 6f the

hole.    \A\/

♦    If oil does not come out of the hole, opdn oil fiHer cap (2) and add the specified oil. Tightenvthę filler cap andoil level bolt firmly and inspect again as abb.ve procedurę.

♦    Tighten the filier cap ahd oil lev$l boft firmly.

H Oil ievel bolt; 5.5 Nm (0.55 kgf-m, 4.0 Ib-ft)

TRANSMISSION OIL CHANGE

♦    Warm upthe engine.

♦    Place the motorcycle on the level ground and hołd the motorcycle vertically.

♦    Remove filier cap and drain pług ©. Drain oil thoroughly.

♦    Tighten the drain pług firmly.

H Oil drain pług: 21 N m (2.1 kgf-m, 14.5 Ib-ft)

♦    Pour specified amount of SAE 10W-40 motor oil.

BI Oil change.....750 ml (0.8/0.7 US/Imp qt)

Overhaul........800 ml (0.9/0.8 US/Imp qt)

*    Tighten the fillercap.

*    Run the engine for a few minutes and stop it. Wait a few minutes.

*    Inspect the oil level.