15-8 FRONT FORK AND STEERING
• Make surę approx. 10 mm (0.39 in) of inner rod thread is exposed on the end. (dT15-21)
• Insert the push rod into the inner rod.
• Insert the shaped projection of center bolt into the push rod. ((TT" 15-22)
• Check or adjust the clearance between the locknut and center \ bolt to provide morethan 1 mm (0.04 in). (dri5r22). \ \s J
s. V \ \ <" '*
• Tighten the locknut/center bolt to the specified torque. \ \ \
[5 Locknut/center bolt: 22 Nm (2.2 kgf-m, 16.Ó4b-ft)v>
_ i V\ X \N\ J
• Tighten the center bolt to the specified torque, \ >
H Center bolt: 70 N m (7.0 kgf-m, 51.0 Ib-ft)
• Pour the specified amount fork oil into the outer tubę in aceor-dance with the following table.
SPRING |
STD OIL OUANTITY |
OIL OUANTITY ADJ. RANGĘ |
STANDARD |
362 ml (12.24/12.75 US/Impoz) |
321 -415 ml (10.85/11.30- 14.03/ 14.61 US/Impoz) |
SOFT |
367 ml (12.40/12.92 US/Impoz) |
326 - 420 ml (11.02/11.48- 14.20/ 14.79 US/Imp oz) |
HARD |
357 ml (12.07/12.57 US/Impoz) |
316-410 ml (10.68/11.13- 13.86/ 14.44 US/Imp oz) |
O 99000-99001-SS5: SUZUKI FORK OIL SS-05