FRONT FORK AND STEERING 15-21
FRONT FORK AND STEERING 15-21
Approx.10 mm (0.39 in)
<r
♦ Force out the remaining oil (discharged oil) using compressed air completely.
* With the damper rod in horizontal position, move the inner rod by hand to inspect it if operating smoothly.
If the inner rod is not extend, repeat the “COMPRESSION DAMPER UNIT" procedures (Pour the specified amount fork oil and discharge an excess ot oil). (£3^15-19)
Make surę approx. 10 mm (0.39 in) ot inner. rod thread, is exposed on the end.
r'X \
V \ \ v* \ \S
\ K \ \\>>
/W
* Completely wipe off the fork oil from the spring and damper rod assembly.
♦ insert the spring and damper rod assembly into the fork.
♦ Temporarily tighten the fork cap bolt (sub-tank).
09941-53630: Front fork top cap wrench