suzuki rm25059
FRONT FORK AND STEERING 15-13
• Clamp the axle holder (D with a vise. Protect the axle holder with a rag when using a vise.
• Loosen the center bolt ® completely with a 21 mm socket wrench.
• Compress the outer tubę by hands and install the conrod holder (special tool) between the axle holder bottom (D and locknut
ItoSlI 09910-20115: Conrod holder
Hołd the locknut with a wrench and remove
Remove the push rod.
Wyszukiwarka
Podobne podstrony:
44243 Suzuki RM2501 FRONT FORK AND STEERING 15-25STEERINGREMOVAL • Remove the fro
60169 Suzuki RM2509 FRONT FORK AND STEERING 15-13 ♦ Clamp the axle holder @ with
suzuki rm25049 FRONT FORK AND STEERING 15-3FRONT FORKTUNING The front fork compression and rebound
suzuki rm25061 FRONT FORK AND STEERING 15-15INNERTUBE • Separate the inner tubę out of the outer tu
suzuki rm25065 FRONT FORK AND STEERING 15-19 • Install the new oil seal (D with t
suzuki rm25069 FRONT FORK AND STEERING 15-23 • Tighten the center bolt to the specified torque. H C
suzuki rm25071 FRONT FORK AND STEERING 15-25STEERINGREMOVAL • Remove the front wh
64911 Suzuki RM2503 FRONT FORK AND STEERING 15-27 ♦ Fit the upper and lower outer races with the sp
41125 Suzuki RM2507 FRONT FORK AND STEERING 15-11FRONT FORKREMOVAL • Place a błoc
suzuki rm25047 FRONT FORK AND STEERING 15-1FRONT FORK AND STEERING -CONTENTS- CONSTRUCTION
suzuki rm25051 FRONT FORK AND STEERING 15-5OIL CHANGE (Only for outer tubę oil cham-ber) • &n
suzuki rm25053 FRONT FORK AND STEERING 15-7 FRONT FORK AND STEERING 15-7 he center bolt. mbly and f
suzuki rm25055 FRONT FORK AND STEERING 15-9FRONT FORK TUNING PROCEDURĘ Test ride the motorcycle and
suzuki rm25057 FRONT FORK AND STEERING 15-11FRONT FORKREMOVAL • Place a błock und
suzuki rm25063 FRONT FORK AND STEERING 15-17 INNER TUBĘ AND OUTER TUBĘ • Inspect
suzuki rm25073 FRONT FORK AND STEERING 15-27 FRONT FORK AND STEERING 15-27 • Fit the upper and lo
56010 Suzuki RM2507 FRONT FORK AND STEERING 15-1FRONT FORK AND STEERINGCONTENTS CONSTRUCTION
więcej podobnych podstron