23922 Suzuki RM250D
ENGINE DISMOUNTING AND MOUNTING 3-5
ENGINE MOUNTING
♦ Mount the engine from the right sicie.
* Tighten the engine mounting bolts/nuts to the specified torque.
|
Nm |
kgf-m |
Ib-ft | |
|
©<2> |
43 |
4.3 |
31.0 |
|
© © © |
45 |
4.5 |
32.5 |
|
© |
70 |
7.0 |
50.5 |
<S>
|
Bolt Diameter |
Bolt Length | |
|
8 mm (0.3 in) |
45 mm (1.8 in) | |
|
8 mm (0.3 in) |
55 mm (2.2 in) | |
|
© |
10 mm (0.4 in) |
48 mm (1.9 in) |
|
© |
10 mm (0.4 in) |
105 mm (4.1 in) |
|
© |
10 mm (0.4 in) |
118 mm (4.6 in) |
NOTĘ:
Replace the self-lockirtg nutę with new ones.
Wyszukiwarka
Podobne podstrony:
64911 Suzuki RM2503 FRONT FORK AND STEERING 15-27 ♦ Fit the upper and lower outer races with the sp
60169 Suzuki RM2509 FRONT FORK AND STEERING 15-13 ♦ Clamp the axle holder @ with
78208 Suzuki RM2509 FRONT FORK AND STEERING 15-23 ♦ Tighten the center bolt to the specified torque
49847 Suzuki RM1254 FRONT FORK AND STEERING 16-17 ♦ Tighten the fork upper clamp
Suzuki RM2501 FRONT FORK AND STEERING 15-15INNERTUBE ♦ Separate the inner tubę out of the outer tub
Suzuki RM2505 FRONT FORK AND STEERING 15-19 ♦ Install the new oil seal ® with the special tool unti
87830 Suzuki RM125? CYLINDER, PISTON AND EXHAUST VALVE 6-13 ♦ Remove the pin ® by pushing the retain
Suzuki RM250A 3-2 ENGINE DISMOUNTING AND MOUNTINGENGINE DISMOUNTING • Drain transm
więcej podobnych podstron