46383 Suzuki RM1258

46383 Suzuki RM1258



11-6 FUEL SYSTEM

11-6 FUEL SYSTEM

osai



NEEDLE VALVE INSPECTION

If foreign matter is caught between the valve seat and the nee-dle valve, the fuel will continue flowing and overflow. If the valve seat and needle valve are worn beyond the permissible limits, similar trouble will occur. Conversely7 if the needle valve sticks, the fuel will not flow into the float chamber. Clean the float cham-ber and float parts with gasoline. If the needle valve is worn, as shown in the illustration, replace it along with a new valve seat. Clean the fuel passage of the mixing chamber using com-pressed air.

FLOAT HIGHT ADJUSTMENT

• Measure the float height with the vernier calipers. To measure the float height, tilt the carburetor until the float tip just con-tacts the needle valve.

| Standard float height ®: 8.7 ± 1.0 mm (0.34 ± 0.04 in) ” 09900-20101: Yernier calipers

REASSEMBLY

Reverse the sequence of removal.

NOTĘ:    \XHW>

Fit the projection of throttfe vafve coiiąr in the grodve of cable

hotder.    /

/ /    - V V >

• Fit the projection on the carburetor body to the depression of the intake pipę.




Wyszukiwarka

Podobne podstrony:
suziki rm12528 11-6 FUEL SYSTEM 11-6 FUEL SYSTEM NEEDLE VALVE INSPECTION If foreign matter is caugh
Suzuki RM1251 13-4 ELECTRICAL SYSTEMIGNITION COIL INSPECTION •    Remove the seat an
89559 Suzuki RM1253 12-4 COOLING SYSTEMRADIATOR REMOVAL •    Remove the seat and fue
Suzuki RM1253 12-4 COOLING SYSTEMRADIATOR REMOVAL •    Remove the seat and fuel tank
47519 Suzuki RM1253 13-6 ELECTRICAL SYSTEM • Remove the nut with a special tool. KEjII 09930-40113:
19783 Suzuki RM1258 ELECTRIC AL SYSTEM 13-1ELECTRIC AL SYSTEM CONTENTS CONSTRUCTION
69818 Suzuki RM1255 12-6 COOLING SYSTEM • Inspect the bearing for smooth inner race movement. 12-6
89904 Suzuki RM1259 13-2 ELECTRICAL SYSTEMCONSTRUCTIONELECTRICAL SYSTEM Color codę: B/R: Black with
78795 Suzuki RM1257 12-8 COOLING SYSTEM •    Replace the water pump case gasket with
Suzuki RM125G MACHINĘ TUNING 4-3 As shown below, each tuning part is located between the air/fuel pa
Suzuki RM1255 12-6 COOLING SYSTEM • Inspect the bearing for smooth inner race movement. 12-6 COOLIN
Suzuki RM1257 12-8 COOLING SYSTEM •    Replace the water pump case gasket with a new

więcej podobnych podstron