Protective trim moldings Page 1 of 1
66-1
Protective trim moldings
Protective trim moldings, removing and
installing
Note:
Protective trim moldings cannot be removed
without destroying them.
- Make sure all bonding surfaces are free of dust and grease.
Protective trim moldings must only be installed at room temperature.
Vehicle and protective trim molding (to be installed) must be left at room
temperature for at least 2 hours before treating.
- Pull off backing sheet -4- shortly before installing.
Protective trim molding must be installed within 90 minutes after backing
sheet has been removed.
- Position protective trim moldings -1-, -2-, or -3- at front with guide stud
and bond toward rear.
- Apply pressure of 100 N/cm to protective trim moldings by pressing
against or using roller.
- Vehicle must remain at room temperature for 4 hours (minimum) after
installing moldings.
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.66.1 11/20/2002