M3-5 Centralny Instytut Ochrony Pracy
3-5. STANOWISKA PRACY WYKONYWANEJ W POZYCJI
STOJACEJ
dr inz. Danuta Liu
3-5.9. Bibliografia
1. Arras A., Stranden E.: Measurement of postural angles during work. Ergonomics,
Vol. 31, No. 5, 1988, 935-944.
2. Basmajian J. V., DeLuca C. J.: Muscles alive - their functions reveald by
electromyography. 5th ed., Williams & Wilkins, Baltimore 1985.
3. Bigland B., Lippold O.: The relation beteen force, velocity and integrated electrical
activity in hyman muscles. Journal of Physiology, 1954, 123, 214-224.
4. Bjurvald M.: Regulating in the area of ergonomics  supervisional approaches
concering musculo-skeletal risk factor in Sveden. Raport National Board of
Occupational Safety and Health, Sveden, 1994.
5. Chaffin D. B., Erig M.: Occupational Biomechanic. (2nd ed.), New York, John Wiley &
Sons 1991.
6. Corlet E., Wilson J., Manenica I.: Posture targeting; a technique for recording
working postures. Ergonomics 22 (3), 1979, 357-366.
7. Gagnon M., Plamondon A., Gravel D.: Pivoting with the load; an alternative for
protecting the back in asymetrical lifting. Proceedings the second North American
Congress on Biomechanics, Chicago, August 24th - 28th, 1992, 517-518.
8. Gedliczka A. UniTOR  program rejestracji procesu pracy. Bezpieczenstwo Pracy
1996, 1, 12-16.
9. Grinten M., Smitt P.: Development of a practical method for measuring body part
discomfort. Kumar S. (ed), Advances in Industrial Ergonomics and Safety IV, New
York, Taylor & Francis 1992, 311-318.
10. Jonsson B.: Measurement and evaluation of local muscular strain in the shoulder
during constrained work. Journal of Human Ergology, 12, 1982, 73-88.
11. Karhu U., Kansi P., Kuorinka I. Correcting working postures in industry. A practical
method for analysis, Applied Ergonomics, 8, 1986, 199-201.
12. Kivi P., Matilla M.: Analysis and improvement of work postures in the building
industry: application of the computerised OWAS metho. Applied Ergonomics 1991,
22, 43-48.
13. Kuorinka I. et. al: Standarized nordic questionaires for the analysis of
musculoskeletal symptoms. Applied Ergonomics 1986, 18, 3, 233-237.
14. Miedema M. C., Douve M., Dul J.: Proposal for the recomended maximum holding
time of static standing posture. TNO Institute of Preventive Health Care 1993.
15. Mital A., Nicholson A., S., Ayoub M., M.: A Guide to manual materials handling.
London-Washington DC, Taylor & Francis 1993.
16. Molteni G., Occipinti E., Colombini D., Grieco A.: Questionaire and clinical functional
procedures for the screening of spinal disorders in working communities. Marras W.
S. et al (eds). The Ergonomics of Manual Work. London - Washington D.C., Taylor &
Francis 1993, 295-299.
17. Pedotti A.: Perspective in human motion analysis. Biology of Sport, Warsaw 1998,
5, Suppl.1, 169-178.
18. Reynolds J., Drury C.: Afield methodology for the control of musculoskeletal injuries.
Applied Ergonomics, 1994, 25, 3-16.
19. Smyth G., Gagnon M.: The optimal placement of boxes on the shelves of a food
warehouse. Proceedings the second North American Congress on Biomechanics.
Chicago, August 24th - 28th, 1992, 431-432.
20. Waters T. R., Putz-Anderson V., Garg A., Fine L. J.: Revised NIOSH equation for the
design and evaluation of manual lifting tasks. Ergonomics 1993, 36, 749-776
21. Winter D.A.: Biomechanics of human movement. New York, John Wiley and Sons
1979.
22.
Strona 1
M3-5 Centralny Instytut Ochrony Pracy
22. Rozporzadzenie Rady Ministrów z dnia 1 grudnia 1990 r. w sprawie wykazu prac
wzbronionych mlodocianym (DzU nr 85, poz. 500 ze zm.).
23. Rozporzadzenie Rady Ministrów z dnia 10 wrzesnia 1996 r. w sprawie wykazu prac
wzbronionych kobietom (DzU nr 14, poz. 545).
24. Rozporzadzenie Ministra Pracy i Polityki Spolecznej z dnia 14 marca 2000 w sprawie
bezpieczenstwa i higieny pracy przy pracach transportowych (DzU nr 26, poz. 313
ze zm.).
25. EN 547-1: Safety of machinery - Human body measurements  Part 1: Principles
for determining the dimensions required for openings for whole body access into
machinery.
26. EN 547-2: Safety of machinery - Human body measurements  Part 2: Priciples for
determining the dimensions required for access openings.
27. EN 1005-1: Safety of machinery - Human physical performance  Part 1: Terms
and definitions.
28. EN 1005-3: Safety of machinery - Human physical performance  Part 3:
Recomended force limits for machinery operation.
29. ISO Standard: Ergonomics Antropometry and Biomechanics - Human Physical
Strength: Recomended Force Limits.
30. 3D Static Strength Prediction Program - User`s Manual. The University of Michigan
1993.
<- Poprzedni podrozdzial | Nastepny podrozdzial ->
Strona 2