1) Open the script filecheck.cig and filechekcadmin.cgi. On the first line, make sure that the path to Perl is correct. If not, modify it. If not sure, check with your ISP. 2) Create this folder, upload the files and chmod accordingly. All files must be uploaded in ASCII mode. http://www.yourdomain.com/cgi-bin/filecheck (777) - filecheck.cgi (755) - filecheckadmin.cgi (755) - filecheck.dat (666 or 777 - preferably 666 for higher security) - filecheck.config (666 or 777 - preferably 666 for higher security) 4) Configure the settings by calling up the script filecheckadmin.cgi from your browser. The defautl password is "upoint". You may change it. 5) Place this tag into your existing web page (remember to rename it to shtml extension) where you want the age indicator to appear: where X is a reference number. Please note that X must be set as a 5-digit number ONLY in the admin interface (such as 00001 or 00014). But in the SSI tags, the leading zeros can be omitted. Example: 6) For more instruction, please execute the script filechekcadmin.cgi. PROBLEMS? ======== Please sent an email to [e-mail] describing - the problems - error message generated - URL to the script and/or result page - other things that you think might be helpful * We usually response in less than 12 hours (average is about 4 hours). But before that, you will receive an auto-responded email describing the most common CGI installation mistakes. The Management, UPDN Network Sdn Bhd www.upoint.net General: [e-mail] Technical help: [e-mail]