5967952455

INSTALLATION NOTES:

Thickness is the dimension from the inside face to the outside face of the crank arm, at the location where the pedał screws into the

Width is the dimension from the top edge of the crank to the bottom edge, at the location where the pedał screws into the crank arm.

•    The following chart does not account for Chain clearance. Always ensure sufficient Chain clearance (5 mm or morę) on the drivetrain side when installing Vector. As Vector S has a pedał pod on the left side only, clearance is not an issue.

•    If washers are required, they should always be installed between the pedał pod and crank arm.The number of washers used should be addressed on a case by case basis. Never use morę than two (2) washers per pedał.

•    Properly torque the pedals down with a torque wrench to 25-30 Ibf-ft to ensure the highest accuracy.

COMPATIBILITY: Vector	ORIGINAL STANDARD up to 38 mm wide. 12 -15 mm thlck 2013-2014 Belng replaced by new standard	NEW STANDARD up to 44 mm «wde. 12 -15 mm thlck 2014*	NEW LARGE up to 44 mm wlde. 15-18 mm thlck 2014*	NOT COMPATIBLE
	010-00994-00	010-00994-03	010-00994-04
Part number Vector S	N/A	010-00994-10	010-00994-11
Campagnolo	Super Record			Bora Ultra
	Record
	Chorus			Bullet Ultra
	Athena
Cannondale		SiSL2
		Pro
FSA	Gossamer		K-Force Light	Metron
			SLK Light
	Energy
			Trimax Al
Rotor	3D+
		Flow
Shimano	Dura Ace 7000 series
	Ultegra
	105
		Dura Ace 9000 series
Specialized			S-Works Carbon
			Pro Road
SRAM	Ali Road Models