5314028076

TEST EQUIPMENT Delta OIB-1 Operating Impedance Bridge	SIZE:	(without panel)	7" (17.8 cm) H; 9" (22.8 cm) W; 9-1/4 (23.5 cm) D.
Operating in the 500-kHz to 5-MHz rangę, the OIB-1 measures operating impedance of radiators, networks, transmission linę sections, and common point of directional		(panel size)	7" (17.8 cm) H; 19" (48.5 cm) W.
antenna systems while they are functioning normally and under fuli power. The unit is inserted directly in series with	WEIGHT:		12 Ibs (5.4 kg)
the equipment to be measured. Transmitter power is applied and a bridge balance obtained by manipulation of the two dials. Resistance and reactance can then be read	CPB-1	NPN	Common Point Impedance Bridge, 5 kW
directly. The vswr can be read from a meter scalę. Through power rating of the unit is 5 kW modulated; 10 kW carrier only. Accuracy is ±2%, ±1.0 ohm.	CPB-1 A	NPN	Common Point Impedance Bridge, 50 kW

SIZE:

5-1/4" (13.3 cm) H;

9-1/2" (24 cm) W;

12-1/2" (31.7 cm) D.

WEIGHT:

OIB-1    NPN

CPB-1 Common Point Impedance Bridge B & W 210 Audio Oscillator

10 Ibs (4.54 kg)

Operating Impedance Bridge

This unit provides Iow distortion signals from 10 Hz to 100 kHz. An RC audio Circuit is followed by an amplifier with extremely Iow distortion characteristics. It is ideał for testing broadcast station response, high fidelity equipment, filter characteristics, and any equipment requiring a signal of a known frequency.

SIZE:    9" (22.8 cm) H;

6" (15.2 cm) W;

12" (30.5 cm) D.

WEIGHT:    11 Ibs (5 kg)

210    NPN    Audio Oscillator

OIB-1 Operating Impedance Bridge

Delta CPB-1/1A Common Point Impedance Bridge

These two bridges are similar in operation to the OIB-1 model, but are designed for permanent installation in the phasing equipment at the antenna common point. The

CPB-1 will handle common point powers up to 5 kW with    _

100% amplitudę modulation on a continuous basis. The

CPB-1 A is designed for transmitter powers up to 50 kW.    B & K 210 Oscillator    B & K 410 Distortion Meter

4-14