5441336617

Chapter 4 - Configuration

The web-based configuration tool lets you change advanced settings for the AirStation. Don't change these settings unless you know what you're doing.

Accessing the Web-based Configuration Interface

To configure the AirStation's advanced settings manually, log in to the web-based configuration interface as shown below.

1

2

Launch a web browser.

Blank Page - Windows Internet Explorer

GO

☆ & |

| jBj 192.168.11.1 Blank Page

Enterthe AirStation's LAN-side IP address in the address field and press the Enter key.

Notę:

The Air$tation's default LAN-side IP address depends on the position of the modę switch.

In router modę: 192.168.11.1 In bridge modę: 192.168.11.100

Notę: If the router switch is set to auto and the unit is in bridge modę, then the AirStation's IP address was assigned by an external DHCP server.

If you changed the IP address of the AirStation, then use the new IP address.

3

Enter "admin"for the username and "password"for the password and click [OK].

Notę: If you forget your password, hołd down the reset button (page 9) to initialize all settings. Notę that all other settings will also revert to their default values.

-16-