5441337216

Attaching an AMPS Base Platę to the Mount

The AMPS mount is not included with the ragged mount.

I. Thread the screws © through the washers ©, mount ® and AMPS mount base piąte © (not included).

2. Tighten the nuts © to secure the base piąte.

The recommended torque is 15-20 lbf-in (1.7 to 2.25 Nm).

Installing Your Montana in the Mount

NOTICE

Before placing the device in the mount, ensure that the metal contacts on the device and the mount are diy to avoid eąuipment damage. Use the weather cap to keep the mount cradle dr)'.

EN-4

AMPS Ruggecl Mount Instructions