7696081204

4-18

4.8 Mounting and Dismounting the Module.

CHAPTER 5 ASSIGNMENT I (MC PROTOCOL COMMUNICATION BETWEEN PC AND PLC CPU)

5-1 to 5-38

5 1 System Configuration for Exercise .....................................................5-1

5.2 Parameter Settmgs and TCP/IP Settings for PC    5-4

5 2 1    GX Developer startup and multiple CPU setting    5-4

5.2.2    Network parameters setting the number of MNET/1 OH Ethernet cards.....................................5-6

5.2.3    Transfer setup...............................................................................................................................5- 9

524    Parameterwrite    5-10

5 2 5    TCP/IP settings for PC.................................................................................................................5-11

5 3 Operation of MX Component................................................................5-13

5 3 1    Setting the logical station number    5-13

5 32    Communicationdiagnostics    5-16

5 4 Visual Basic Program (Device Read)....................................................................................................5-17

5 4 1    Visual basie program    5-17

5 4 2    Operation of demonstration machinę    5-24

5 5 Visual Basic Program (Device Write)    5-29

5 5 1    Visual basie program    5-29

5.5.2    Operation of demonstration machinę    5-34

CHAPTER 6 ASSIGNMENT II (FIXED BUFFER COMMUNICATION BETWEEN PLC CPUS _(PROCEDURĘ EXIST))_ 6-1 to 6-18

6 1 System Configuration of Exercise    6-1

6 2 Ethernet Module Settings on the Sending Side.....................................................................................6-3

6 2 1 Setting parameters with GX Developer    6-3

6 2 2 Sequence program    6- 6

6 3 Ethernet Module Settings on the Receiving Side    6-9

6 3 1 Setting parameters with GX Developer    6-9

6 3 2 Sequence program    6-12

6 4 PING Test Using GX Developer (Via CPU)    6-14

6 5 Operation of Demonstration Machinę    6-17

CHAPTER 7 ASSIGNMENT III (FIXED BUFFER COMMUNICATION BETWEEN PLC CPUS (NO

PROCEDURĘ))_7-1 to 7-20

7 1    System Configuration of Exercise    7-1

7.2    Ethernet Module Settings (PLC A1    to A5)..............................................................................................7- 3

7 2 1 Setting parameters with GX    Developer    7-3

7 2 2 Sequence program    7- 6

7.3    Ethernet Module Settings (PLC B1 to B5)    7-11

7.3.1 Setting parameters with GX Developer.......................................................................................7-11

7 3 2 Sequence program......................................................................................................................7-14

7 4 PING Test Using GX Developer (Via CPU)    7-18

7.5 Operation of Demonstration Machinę .................................................... 7-19

CHAPTER 8 ASSIGNMENT IV (FIXED BUFFER COMMUNICATION BETWEEN PLC CPUS VIA ROUTER _(NO PROCEDURĘ))_8-1 to 8-10

8.1    System Configuration of Exercise..........................................................................................................8-1

8.2    Ethernet Module Settings (PLC A1 to A5)..............................................................................................8- 2