7696081383

Setup

WAN / LAN

Wireless

Firewall

Games/ Apps

NAS

Admin

Diagnostic

System Info Logs Ping

Packet Info Client Monitor

Log Out Manuals & Utilities

Model	WZR-600DHP Ver.1.78 (R1 09/B1.01)
AirStation Name	AP106F3F0DC898
Modę Switch Status	Router modę on
Operational Modę	Router modę on
Movie Engine Status	OFF
Internet	Method of Acguiring Au(0 Deted Mode. ppPoE IP Address
	Name of Connection Easy Setup (Default Connection) Connection Status Online Operation | Stop | IP Address 180.30.158.190 PPP ServerlP 118.23.61.228 DNSI(Primary) 222.146.35.137 (Auto) DNS2(Secondary) 221.184.25.25 (Auto) MTUSize 1454
	Wired Link 1000Base-TX (Full-duplex) MAC Address 10:6F:3F:0D:C8:98
LAN	IP Address 192.168.11.1 SubnetMask 255.255.255.0 DHCP Server Enabled MAC Address 10:6F:3F:0D:C8:98
Wireless (802.11n/a)	Wireless Status Enabled SSID BUFFALO-ODC898_A Authentication WPA/WPA2 mixedmode-PSK Encryption TKIP/AES mixed mode
	BroadcastSSID Enabled Privacy Separator Disabled Wireless Channel 40 (Auto) 300 Mbps Mode 40 MHz (extension channel: 36) MAC Address 10:6F:3F:0D:C8:99
Wireless (802.11n/g/b)	Wireless Status Enabled SSID BUFFALO-ODC898_G Authentication WPA/WPA2 mixedmode-PSK Encryption TKIP/AES mixed mode
	BroadcastSSID Enabled Privacy Separator Disabled Wireless Channel 11 (Auto) 300 Mbps Mode 20 MHz MAC Address 10:6F:3F:0D:C8:98
NAS	USB disk Connected Shared Folder Enabled WebAccess Disabled Media Server Disabled BitTorrent Disabled
ECO Modę	Status Disabled

Displays the AirStation's main settings.

Model

Displays the model name and firmware version of the AirStation.

AirStation Name

Displays the AirStation's hostname.

Modę Switch Status

Displays the status of the ROUTER switch.

Refresh

System Information

Operational Modę

Displays the current modę of operation.

Movie Engine Status

Displays the status of the Movie Engine switch.

Internet

AirStation's Internet port side information.

Method of Acquiring IP Address

Acquiring a Internet IP address.

Name of the Connection

The name ofthe PPPoE connection specified in the configuration.

Connection Status

Displays the current Internet side status.

Operational Modę

The Operational Modę will show if any DHCP or PPPoE configuration is active. If DHCP is in use. the following commands can be executed.

•    [Release]: Releases the IP address assigned by the DHCP Server.

•    [Renew]: Renews the IP address from the DHCP Server.

The following commands can be

executed when using PPPoE.

•    [Start]: Start connecting to a PPPoE Serverfrom idle/stop.

•    [Connect]: Connect to PPPoE from an idle condition.

•    [Disconnect]: Disconnect communication with a PPPoE Server.

•    [Stop]: Stop idle condition.