SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

X

MAKE

VOLVO

MOD.

V 70*

YEAR

04 âÄ…Å‚ PETROL

DIESEL

* Models with original equipment keyless entry system.

ALARM/SIREN

Position the compact alarms and the sirens on the support of the servobrake, in the engine POSITION

compartment. Pass the cables using the core hitch of the bonnet opening placed under the dashbpoard driver’s side, on the left of the clutch pedal.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the driver’s side dashboard.

ASS THE CABLES

+30: connect directly to the positive end of the battery.

-31: connect directly to the car body.

IGNITION WIRE

+15/54: connect to the BLUE wire, at the position nr. 9, on the fuse box, on the side of the dashboard, driver’s side.

DIRECTION INDICATORS

Connect to the GREEN wire at the position nr.2 in the connection marked SH1 and GREEN/WHITE wire, at the position nr.2 of the connection marked SH2, in the posterior part of the relais holder plate located under the driver’s side dashboard.

ELECTRIC WINDOWS

Positive control signals

Front window, drivers side: cut the VIOLET wire, at the position nr. 4, in the 12 way grey connector, in the driver’s side switches panel.

Front window, passengers side: cut the VIOLET wire, at the position nr. 4, in the 12 way grey connector, in the driver’s side switches panel.

Rear window, drivers side:

cut the GREEN/BROWN wire, at the position nr. 1, in the grey connector, marked MI 24, behind the relay holder form, under the driver’s side dashboard.

Rear window, passengers side: cut the GREEN/BROWN wire, at the position nr. 1, in the grey connector, marked M1, behind the relay holder form, under the driver’s side dashboard ACTIVAT./DEACTIVATION

Connections antitheft/vehicle CONTROLS

Refer to the fitting diagram nr. 215.

IMMOBILISATION POINT

Fuel pump

Cut the LIGHT BLUE wire, at the position nr. 7, on the MI 12 connection, behind the relay holder plate.

STARTER

+50: cut the 0,35 mm2 YELLOW/WHITE wire located in the left part of the connector fixed on the central, under the driver’s side dashboard.

BONNET SWITCH

Install an additional switch on the front headlamp support plate.

DOORS SWITCH

Connect to the WHITE wire of the lamp that enlighten the pedals.

Note: the front lamp is with positive polarity. Invert the polarity with an additional relay.

BOOT SWITCH

Connect to the WHITE wire of the serial boot lamp.

Note: the boot lamp is with positive polarity. Invert the polarity with an additional relay.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed vov7004gbbt.doc

as per the instructions given on the product installation manual.



SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM NR. 215

3800 serie antitheft

YELLOW GREY/BLACK

ORANGE VIOLET/WHITE

VIOLET

ORANGE/WHITE

YELLOW/BLACK

30 way green 12 way grey

connector connector

nr.12 nr.13 nr.2

ground

+30

1N5406

GREY

diodes

M

BLUE/

WHITE

Driver’s side

VIOLET/WHITE

direction indicator

SH1 connection

switch

GREEN

AP

1N5406 diode

ground

ground

The 30 way white and 12 way grey connectors are located on the coming out of the push-button panel directly inside the driver’s side door. The SH1 connection is located on the relais holder plate under the driver’s side dashboard.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed vov7004gbbt.doc

as per the instructions given on the product installation manual.