SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 01

www.cobra.it

MAKE

VOLVO

MOD.

S 40

YEAR

04 âÄ…Å‚ PETROL

DIESEL

X

ALARM/SIREN

Position the compact alarms and the sirens on the support of the shock absorber, in the POSITION

engine compartment, passenger’s side.

Pass the cables using the original fairlead located behind the passenger’s side glove compartment.

CENTRAL UNIT POSITION

Position the modular sistems and the modules under the dashboard, passenger’s side.

POWER SUPPLY

+30: connect to the 2 mm2 RED wire located in a green multiway connector, in the fuse box.

-31: connect to one of the ground terminals located behind the left lateral bulkhead, driver’s side.

IGNITION WIRE

+15/54: connect to the WHITE/GREEN wire, at the position nr.3, in the wiring harness coming out of the connector of the ignition key.

DIRECTION INDICATORS

Connect to the wires: LIGHT BLUE and LIGHT BLUE/RED in the brown connector located in the lower part of the fuse box.

CENTRAL DOORS LOCKING Negative control signal Connect to the wires: RED/BLACK at the position nr.2 (lock) and YELLOW/BLACK at the position nr.3 (unlock), in the wiring harness coming out of the 5 way connector of the open/close push-button on the driver’s side door.

IMMOBILISATION POINT

Gasoil pump

Cut the WHITE/GREEN wire at the position nr.3, in the wiring harness coming out of the connector of the ignition key.

STARTER

+50: Cut the GREY/BLACK wire at the position nr.2, in the wiring harness coming out of the connector of the ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the BLACK wire in the wiring harness coming out of the connector of the lamp installed at the driver’s foot place.

BOOT SWITCH

Connect to the BLACK/LIGHT BLUE wire in the wiring harness coming out of the connector of the boot lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed vos4004gbdr1.doc

as per the instructions given on the product installation manual.