SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL X
ALFA ROMEO GT * 04 DIESEL

MAKE MOD. YEAR
* Models with origianl equipment keyless entry system.
ALARM/SIREN Position the compact alarms and the sirens in the engine compartment, driver s side.
Pass the cables using the original fairlead of the bonnet opener cable.
POSITION
Position the modular sistems and the modules under the dashboard, driver s side.
CENTRAL UNIT POSITION
POWER SUPPLY +30: connect to the 6 mm2 WHITE/RED wire located in the multiway connector, in the fuse
box.
-31: connect directly to the car body.
IGNITION WIRE +15/54: connect to the ORANGE wire, at the position nr. 14, of the 20 way brown connector
located in the connector placed on the right of the fuse box, under the driver s side dashboard.
DIRECTION INDICATORS The direction indicators are separated. Divide the lines with diodes. Refer to the B section of
the fitting diagram nr. 217.
Note: the lateral direction indicators must not be connected.
ELECTRIC WINDOWS Positive control signals
Front window, driver s side:
cut the WHITE/RED wire in the wiring harness coming out of the push-button inside the
driver s side door.
Front window, passenger s side:
cut the VIOLET/BLACK wire in the wiring harness coming out of the driver s side door.
ACTIVAT./DEACTIVATION Connections antitheft/vehicle
CONTROLS Art. 3800 Vehicle Position
YELLOW/BLACK YELLOW/GREEN Pos. nr.18 in the 32 way black connector
GREY/BLACK GREY/GREEN Pos. nr.16 in the 32 way black connector
VIOLET BROWN/YELLOW Pos. nr.22 in the 40 way black connector
VIOLET/WHITE Ground Car body
ORANGE Ground Car body
ORANGE/WHITE Ground Car body
The 32 way black connector is located in the above part, on the left of the frontal part of the
fuse box. The 40 way black connector is located down, on the left of the frontal part of the fuse
box. The BROWN/YELLOW wire is the control of one of the two lateral direction indicators.
IMMOBILISATION POINT Fuel pump
Cut the VIOLET/YELLOW wire in the wiring harness behind the driver s side sill cover.
STARTER +50: Cut the BROWN wire in the wiring harness coming out of the connector of the ignition
key.
BONNET SWITCH Install an additional switch on the headlamp support plate.
DOORS SWITCH Connect to the wires: RED at the position nr. 8, WHITE/GREEN at the position nr. 16,
GREEN/GREY at the position nr. 25, BLUE/VIOLET at the position nr 26, of the 40 way
connector, in the fuse box, under the driver s side dashboard.
Refer to the A section of the fitting diagram nr. 217.
BOOT SWITCH Connect to the LIGHT BLUE/BLACK wire, at the position nr. 36, in the 40 way connector in the
fuse box, under the driver s side dashboard.
Refer to the A section of the fitting diagram nr. 217.
algt04gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM NR. 217
Perimetrical connection with separated lines
A section
1N4007 diodes
LIGHT BLUE/BLACK nr. 36
WHITE/GREEN nr. 16
40 way
black
BLACK/GREY nr. 25
connector
in the fuse
BLUE/VIOLET nr. 26
box
RED nr. 8
1N4007 diodes
BLUE/PINK
B section Direction indicators connection with separated lines
BROWN/BLACK nr. 12
40 way
black
BROWN/VIOLET nr.3
connector
in the fuse
box
BROWN/VIOLET nr. 39
40 way light
BROWN/BLACK nr.38
blue
connector in
BROWN/YELLOW nr.22
the fuse box
1N5406 diodes
YELLOW
YELLOW
VIOLET
algt04gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.