SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL X
BMW 530* 04 DIESEL

MAKE MOD. YEAR
* Models with original equipment keyless entry system.
ALARM/SIREN Position the compact alarms and the sirens on the support of the shock absorber, driver s side.
POSITION
CENTRAL UNIT POSITION Position the modular sistems and the modules under the dashboard, driver s side.
POWER SUPPLY +30: connect to the 10 mm2 RED wire located in the rear part of the passenger s side glove compartment.
-31: connect to an original ground terminal located behind the passenger s side bulkhead.
IGNITION WIRE +15/54: connect to the VIOLET/WHITE wire, in the white central on the left of the steering column. As
alternative: connect to the GREEN/WHITE wire behind the passenger s side sill cover, in the wiring
harness that supplies the rear equipments.
DIRECTION INDICATORS Ant. and post. direction indicators connection
Connect to the wires: BLUE/BROWN at the pos. nr.1, BLUE/GREEN at the pos. nr.4, BLUE/BROWN at
the pos. nr.68 and BLUE/BROWN at the pos. nr.24 in the 76 way white connector, on the black central on
the left of the steering column.
Note: Separate the lines with 1N5406 diodes.
ELECTRIC WINDOWS Control signal with comfort system
The locking of the windows is obtained by original radio control.
ACTIVAT./DEACTIVATION Connections antitheft/vehicle
CONTROLS Art.3800 Vehicle Position
YELLOW/BLACK BLACK/BLUE position nr. 4 in the 13 way black connector
GREY/BLACK BLUE/BROWN position nr. 7 in the 13 way black connector
VIOLET ground car body
ORANGE ground car body
VIOLET/WHITE ground car body
ORANGE/WHITE ground car body
The wires: BLACK/BLUE and BLUE/BROWN are the controls of the motor of the fuel cup. The black
connector is located in the central locking unit placed behind the passenger s side glove compartment.
Note: When finishing the installation, cut the BLUE/RED wire at the position nr. 4, in the 8 way black
connector, inside the driver s side door, near the mechanic locking.
IMMOBILISATION POINT Fuel pump
Cut the VIOLET/BLACK wire located in the wiring harness coming out of the connector of the fuel pump
relay located behind the passenger s side glove compartment.
STARTER +50: Cut the 2mm2 BLACK wire located in the white central on the left of the steering column.
BONNET SWITCH Install an additional switch on the headlamp support plate, driver s side.
DOORS SWITCH Positive control
Connect to the BLUE/GREEN wire at the position nr. 35, in the 54 way black connector coming out of the
central locking unit behaind the glove compartment, passenger s side.
BOOT SWITCH Connect to the BROWN/WHITE wire directly on the coming out of the boot lamp.
bm53004gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.