{\rtf1\ansi\ansicpg1252\deff0\deflang2057{\fonttbl{\f0\fnil\fcharset0 MS Sans Serif;}{\f1\fswiss\fcharset0 Helvetica;}{\f2\fswiss\fcharset0 Helvetica-Bold;}{\f3\fnil MS Sans Serif;}}
{\colortbl ;\red255\green0\blue0;}
\viewkind4\uc1\pard\qc\cf1\b\f0\fs20 G00 Fast Traverse Polar
\par \pard
\par \cf0\b0\f1 The rapid traverse movement G0 is used for rapid positioning of the tool, but not for \b\f2 direct workpiece machining\b0\f1 .
\par All the axes can be traversed simultaneously - on a straight path.
\par For each axis, the maximum speed (rapid traverse) is defined in machine data. If only one axis traverses, it uses its rapid traverse. If two or three axes are traversed simultaneously, the path velocity (e.g. the resulting velocity at the tool tip) must be selected such that the \b\f2 maximum possible path velocity \b0\f1 with consideration of all axes involved results.
\par A programmed feedrate (F word) has no meaning for G0. G2/G3 remains active until canceled by another instruction from this G group (G0, G1, G3, ...).
\par
\par \b\f2\fs22 Programming
\par \b0\f1\fs20 G0 X... Y... Z... ; Cartesian coordinates
\par G0 AP=... RP=... ; Polar coordinates
\par G0 AP=... RP=... Z... ; Cylinder coordinates (3-dimensional\cf1\b\f0
\par
\par \cf0\b0\f3\fs16
\par }