G00 Fast Traverse


{\rtf1\ansi\deff0{\fonttbl{\f0\fnil MS Sans Serif;}{\f1\fnil\fcharset0 MS Sans Serif;}}
{\colortbl ;\red255\green0\blue0;}
\viewkind4\uc1\pard\qc\cf1\lang2057\b\f0\fs24 G00 Fast Traverse
\par \cf0\b0\fs16
\par \pard The G00 code executes a non cutting movement, at a rapid feedrate, to a specific co-ordinate position in the working area (operating under absolute co-ordinate movement) or when a certain distance from a previously stated position (under incremental co-ordinate movement) is programmed.
\par
\par \f1
\par A G00 command is written in the following format:
\par G00 X _ _ _ _ Y_ _ _ _ Z _ _ _ _ ;
\par where,
\par G00 is the Rapid Positioning/ Traverse code.
\par X _ _ _ _ Y_ _ _ _ Z _ _ _ _ are the X, Y and Z axis co-ordinate values.
\par
\par The axis co-ordinate moves following a G00 command can be programmed as either:
\par 1) absolute values (relative to a set datum point) following setting of the G90 code, or,
\par 2) incremental values (relative to the last stated co-ordinate in the program) following setting of the G91 code.
\par
\par
\par
\par \f0
\par }


Wyszukiwarka

Podobne podstrony:
G00 Fast Traverse
G00 Fast Traverse
G00 Fast Traverse
G00 Fast Traverse
G00 Fast Traverse
G10 Linear Polar in Fast Traverse
Linear Fast Traverse
G00?st Traverse
Speak Japanese Fast
Szybko i wściekle Fast & Furious (2009) DVDRip R5 XviD
fast log entry
KALORYCZNOŚĆ Fast foodów
Fast Food Copywriting 1
INSTRUKCJA OBSŁUGI MODEM ASDL SAGEM USB FAST 800 840 PL
G01 Linear Traverse XYZ
Upgrading biomass fast pyrolysis liquids

więcej podobnych podstron