6.

7.

8.

11.

2

1

1

9.

6.

10.

Part number

H6300 SS100

Date

2000/11/13

Subaru of America

Page

3/4

FRONT DOOR

FRONT DOOR

Part number

H6300 SS100

Date

2000/11/13

Subaru of America

Page

4/4

12.

REPEAT STEPS 1 THROUGH 11
FOR OPPOSITE SIDE

REINSTALL DOOR PANEL AND

COMPONENTS IN REVERSE

ORDER OF DISASSEMBLY.

“It is recommended that this
product be installed by a trained
Subaru Technician at your local
Subaru dealer. If you intend to
install this product and you feel
that additional detailed
instructions might be of benefit
to you, please contact your local
Subaru dealer for more detailed
Installation Instructions.”

13.

1.

GLASS DOWN

2.

3.

5.

FRONT DOOR

4.

Part number

H6300 SS100

Date

2000/11/13

Subaru of America

Page

2/4

2

1

1

2

3

1

1

2

1

2

3

Part Number

H6300 SS100

Installation Instruction for TWEETER KIT

Front Door

INSTAL

LATION

INSTRU

CTION

INSTALLATION

INSTRUCTION

x1

Part number

H6300 SS100

Date

2000/11/13

Subaru of America

Page

1/4

LH X 1

RH X 1

TAPE

PRINTED IN USA

BDS-A13H19A (R-0)

This page does not print
This file has 4 pages of a 4 page document.

If you do not have a non-marring plastic tool, wrap a slot screwdriver with electrical tape. Be careful not to
damage the interior trim.

1. Put the glass down on the front windows.
2. Remove the triangular piece of trim by carefully prying it off.
3. Remove the bezel trim around the door handle. Pull the trim down in location 1 and insert the

screwdriver also pulling up in location 3. Start prying in location 1 and work your way around the
part.

4. Lift screw cover with slot screwdriver and remove screw with phillips screwdriver.
5. Lift rear of trim at location 1 and pull trim rearward and lift up.
6. Disconnect all connectors from trim piece.
7. Remove screw with phillips screw driver.
8. Start at the bottom of the door panel and pull away from the door. Then lift panel off of the door.
9. Install the two plastic gromments provided in the kit (see step 10 for a more detailed picture) place the

proper tweeter (left or right hand) over the grommets and screw down using the two screws provided
in the kit.

10. This is a detail of the tweeter installation area.
11. Connect the tweeter into the vehicle harness.
12. Repeat steps 1 through 11 for the other side of the vehicle.
13. Reinstall door panel and components in the reverse order of disassembly.