Content










10.2


Configuring NAT
 


 

10.2.9


Configuring TCP load distribution
 







The following steps configure TCP load
distribution:

Define a pool of addresses containing
the addresses of the real hosts:


Router(config)#ip nat pool name start-ip end-ip {netmask
netmask |
prefix-length prefix-length} type rotary





Define an access list permitting the address of the virtual host:


Router(config)#access-list access-list-number permit
source
[source-wildcard]





Establish dynamic inside destination translation, identifying the
access list defined in Step 2:


Router(config)#ip nat inside destination list access-list-number
pool name





Specify the inside interface:


Router(config)#interface type number





Mark the interface as connected to the inside:


Router(config-if)#ip nat inside





Specify the outside interface:


Router(config-if)#interface type
number




Mark the interface as connected to the outside:


Router(config-if)#ip nat outside




















 



Web Links

Configuring IP Addressing



http://www.cisco.com/en/US/products/ sw/iosswrel/ps1831/
products_configuration_guide_ module09186a00800ca6b4.html