1995 > G 2.0 DOHC

Removal

The engine coolant temperature sensor is near the thermostat. 1. Disconnect the engine coolant temperature sensor connector 2. Remove the engine coolant temperature sensor. Installation 1. Install a new washer and the engine coolant temperature sensor in the engine. Tighten to 18-22 lb-ft (25-29N·m). 2. Connect the sensor connector. 3. Start the engine and check for coolant leakage. Inspection 1. Place the sensor in a beaker of water with a thermometer and heat the water gradually. 2. Measure the resistance of the sensor using an ohmmeter. WATER TEMPERATURE °F (°C) Resistance (kΩ) 68°F(20°C) 2.45±0.24 176°F (80°C) 0.322±0.032 3. If resistances are not within olerance, replace the engine coolant temperature sensor. 4. Install the sensor in the engine. 5. Connect the sensor connector to the sensor.