Good Karma Necklace
Our project this month is a simple, stylish necklace strung on ribbon.
We call this a Good Karma necklace, as we used a glass buddha bead
for the center, but you can use just about anything that is about 1/2" long
to dangle in the center of the ring. Enjoy!
Materials
"
" 1 Large Geometric charm w/ top and bottom hole
" 2 1 ½ inch headpins
" 1 6mm 5301 bicone
" 1 4mm 5301 bicone
" 2 spacer beads
" 1 glass Buddha bead
" 1 yard ribbon
Tools
"
" Chain Nose Pliers
" Round Nose Pliers
" Flush Cutters
Step One
Attach 1 jump ring to the geometric charm, then add the second jump ring
to the jump ring you just attached.
Step Two
Place the Buddha bead on a headpin.
Step Three
Make a simple loop over the Buddha and attach to the second jump ring
you attached to the geometric charm in step one.
Step Four
Place Crystals and spacers on second headpin in desired order.
Step Five
Make a simple loop over the crystals and attach to the bottom
hole on the geometric charm.
Step Six
Thread ribbon through the first jump ring that was attached to the geometric
charm. This will force the Buddha bead to fall into the center of the
geometric ring charm.
Beadstudio.com 266 E. Main St, Ashland OR 97520 541-488-3037