PSIONIC AMPLIFYING HELMET




To make this device, you will need:


1 hard hat.


8 small magnet disks or circular magnets


1 length of copper wire


1 length of speaker wire


1 1/8? monaural audio jack


1 crystal


1 circle of foil


Remove the liner from the hard hat. Now, drill a hole at the top of the shell of the hard hat.
Drill another hole at one side or the back of the hard the right size to mount the jack.


Glue the magnets in a circle above the rim of the hard hat shell. Once you have done that,
take the copper wire and make a spiral (direction doesn't seem to matter) at one of the wire
and lead the wire through the hole at the top of the helmet wrapping it around the crystal and
then glue the crystal to the top of the helmet.


Put the liner back into the hard hat.


Attach the coil to the foil plate.


Strip the insulation off the ends of the speaker wire (I know that sounds elementary but you

would be amazed at the number of people who forget this!)


Attach one set of the ends to the foil plate.


Attach the foil plate to the top of the liner where it will sit on the top of your head when you
wear the helmet.


Run the speaker wire under the line to the jack hole.


Attach the leads of the jack to the speaker wire.


Mount the jack on the helmet.


At this point all you have to do is put on the helmet and think, getting a real clear image in
your head of what you want to send and the helmet will automatically grab the psychic stuff
as it comes out your head, run it around real fast and then shoot it out the top blasting it's
way to the target. And by plugging the helmet into a radionic box, you create a direct
connection between you and the instrument. (Which is why the jack is there!)