MoTomagx user manual v1.1
Supported phone models:
Aura R1,
E8,
EM30,
EM35,
U9,
V8,
VE66,
Z6,
Z6w,
ZN5,
ZN5tm
Features:
Network Unlock
Requirements:
Windows XP, Vista or Windows 7
USB original cable (comes in phone package)
MT Box activated for MoTomagx module
How to start:
Install phone drivers from software folder
c:\Program Files\GriffinTeam\MT MoTomagx\Phone Drivers\USB_Driver_32\
Motorola_EU_Driver_Installation_3.9.0_Motconn__01.00.10I.msi
After drivers installation start MoTomagx software from:
c:\Program Files\GriffinTeam\MT MoTomagx\MoTomagx.exe
Select desired MT Box sn (in drop down list will be shown all MT Box sn, if
you have more then one MT Box connected to this PC)
Check phone model from back side cover, then click to
Change folder
in
MoTomagx software and point to your phone model folder. For example if
you have Motorola U9 for unlock point to c:\Program Files\GriffinTeam\MT
MoTomagx\U9\ folder
Now click to Connect button
In Select Action automatically will be selected U9 Unlock Step 1
If there is a more then one version of Unlock Step 1 file, please select file
by your phone boot loader version
Example: Your phone boot loader version is 06.2a, then you need
Select Action from list U9 Unlock Step 1 (06.2a)
You can use newest boot loader versions for older phone boot loader
If you have phone with newest boot loader then available Unlock Step 1 file,
please report us on support forum in
Now take phone and press in same time * and #, then press phone power
on button (phone flash mode)
Phone will show on their Boot loader version and message:
Battery OK
OK to Program
Connect USB
Data Cable
Now connect USB cable to phone
In software you will see number of connected Phones:
1
If you have connected more then 1 phone to PC their number will be show
in software counter. Please disconnect all phones except this one you want
to unlock.
Now press GO button and wait to software finish Step 1
Wait to phone turn on by it self.
Turn off the phone and connect it in flash mode again (* + # + Power on
button)
Select in software U9 Unlock Step 2 and press GO button and wait to
software finish.
Unlock Step 2 is same for all boot loader versions
That’s all