Artistic Wire"! Green or Magenta
Materials Check List
Green Necklace
Single-Spiral Bead Necklace & Earrings
"!
Artistic Wire
designed by Elaine Schmidt, SCD, CPD
24 gauge, Kelly Green (KG)
Basic Supplies
size 6  E beads, carnival
size 10 seed beads, carnival
"!
.014 Soft Flex wire
(1) clasp
(2) crimp beads
Magenta Necklace and Earrings
"!
Artistic Wire
24 gauge, Magenta (M)
24 gauge, Brown (BR)
Basic Supplies
size 6 red  E beads, 32 red
size 10 gold seed beads, 60 gold
"!
.014 Soft Flex wire
(1) clasp
(2) crimp beads
(2) end pins
(2) jump rings
(2) fishhook earrings findings
"!
Artistic Wire Tools
Round Nose Pliers
Wire Cutters
Wire Worker
(see product instructions for use)
Additional Supplies/Tools
Dish Towel
Instructions Project #108
General Instructions
Spiral Bead: A simple bead made by coiling wire on a Wire Worker tool to length desired. Cut wire ends to finish.
Double Spiral Bead: Create a spiral bead at least 3 long. Thread spiral bead onto a wire. Attach second wire to hole on Wire Worker
tool s cross bar and wind 1/4 coil. Slide spiral bead up to base of coil and hold second wire at base of bead. Continue turning
tool so spiral bead coils around tool. Finish with another 1/4 coil and cut wire ends to finish.
Green Necklace
Step 1: Make 15 long double spiral beads in KG.
Step 2: Arrange beads on towel in this order, beginning on left side of necklace: (1)  E bead, (4) seed beads, (1)  E beads, KG dou-
ble spiral. Repeat this pattern 14 more times.
"! "!
Step 3: Cut 36 Soft Flex wire. Attach clasp hook to left end with crimp bead. Thread beads onto Soft Flex wire in order. Attach clasp
loop to other end. Cut off excess.
Magenta Necklace:
Step 1: Make (9) Double Spiral beads using BR for the Spiral and M as the second wire. Make (8) Double Spiral beads using M for the
Spiral and BR as the second wire.
For your convenience, wire, wire cutters, round nose pliers
and Wire Worker are available for online purchase.
Visit our shopping section at www.artisticwire.com.
Instructions (continued) Project #108
Step 2: Arrange beads on towel in this order, beginning on left side of necklace: (1)  E bead, (4) seed beads, (1)  E beads, M bead,
(1)  E beads, (4) seed beads. Repeat
this pattern until all the M beads are used. Finish the necklace with (1)  E bead, (4) seed beads, BR bead and (1)  E bead.
"! "!
Step 3: Cut 36 Soft Flex wire. Attach clasp hook to left end with crimp bead. Thread beads onto Soft Flex wire in order. Attach clasp
loop to other end. Cut off excess.
Earrings:
Step 1: Make (2) small double spiral beads using BR for the spiral and M as the second wire.
Step 2: Thread (1)  E bead and double spiral bead onto head pin. Use round nose pliers to form a loop. Cut off excess wire. Thread
loop and earrings finding onto jump ring. Close jump ring with pliers. Repeat for second earring.