AR67.30-P-4010K Removing and installing molding on rear side window 24.2.97
MODEL 208.3
1 Molding
2 Cover
3 Rear side window
4 Clips
P67.30-0275-06
Removal
e
1 Open front door
p Damage hazard!
Avoid damaging paint, do not use metal tools
with sharp edges
*110589035900
2 Slide cover (2) forwards until separation joint
l
is free
*110589035900
3 Press molding (1) off of clips (4) with
l
installation wedge (arrow)
4 Remove molding (1)
Installation
5 Check clips (4, 6 each)
i Replace damaged clips
6 Position molding (1) with rubber gasket on
clips (4), align and press on
7 Slide cover (2) over separation joint
8 Check position of gasket on molding (1),
correct, if necessary
9 Close front door
110 589 03 59 00
Installation wedge
Copyright DaimlerChrysler AG 07.02.2011 CD-Ausgabe G/08/04 . Nie objęto obsługą zmian. Strona 1