Audi A4 Cabriolet " S4 Cabriolet
Quick reference guide
Fuel tank flap Fuel
To open: (see sticker)
Press the right side of the flap.
Tyre pressures
To close:
(see sticker on door
Press the tank flap until you hear
pillar on driver side)
it click into place.
Engine oil
The correct oil specifi-
cations and engine oil
capacity are listed in
the Performance,
weights and dimen-
sions section of the
Owner s Manual.
Warning triangle
The compartment for the warning
triangle is located inside the boot lid.
Dear Audi Driver,
This quick reference guide gives you
an overview of the main features and
controls of your vehicle. However, it
cannot replace the detailed Owner s
Manual which contains important
information and safety warnings.
Please refer to your Owner's Manual
for detailed information on your vehicle.
You will find everything you need to
know about the radio, CD, navigation, TV
and telephone functions in the Operating
Manual for your sound system or
navigation system.
We wish you safe and enjoyable
motoring with your new Audi.
AUDI AG
Welcome
13
12 12
10 14
11 11
9
8
5
Door handle and
6
7
central locking switch
Controls and
15
5
Unlock
displays
4
Lock
1
Buttons for seat memory
6
Adjuster for exterior
2 mirrors
Electric windows 3
Turn the adjuster for:
To set the desired position:
Press/pull to the first stop Left exterior mirror
2
and hold.
Exterior mirror heating
 One-touch function:
Right exterior mirror
Press/pull briefly to the
Exterior mirror
second stop.
retraction
3
Bonnet lock release
Press the adjuster to move
1
4
Steering wheel position the mirror glass in the
adjuster desired direction.
16 17
18
14
Windscreen wipers/washer
7
Cruise control system
and buttons for on-board
8 computer
Headlight range control
19
19 Air conditioner
and coming home/leaving 15
Ignition lock
20
home function Driver s seat heating
22
16
Switches and warning
9 21
20 21 Light switch Front passenger s seat
lamps for:
ESP heating
10
Turn signal and main beam Electronic stabilisation
OFF
22
lever program Gear lever or selector lever
for automatic gearbox
11 Passenger airbag off
Controls on multi-function
23
steering wheel Hazard warning lights Handbrake
12 17 24
tiptronic paddle levers Storage tray Power-operated soft top
13 18 25
Instruments and warning/ Sound system or Cigarette lighter/electrical
indicator lamps navigation system socket
23
24
25
Overview
Sitting position Manual seat adjustment
min.
4
Sit in a normal upright position and To move seat backwards or forwards:
25 cm
do not sit too close to the steering 10
Lift the lever and move the seat. Then
wheel. If necessary, also adjust the
release the lever and move the seat further
position of the steering wheel.
until the catch engages.
5
To adjust angle of seat cushion:
9
Lift the lever and adjust the seat angle.
Seat adjustment
6
To adjust seat height:
Pull up or press down the lever repeatedly.
Electric seat adjustment
7
1 To adjust lumbar support:
To adjust seat height and move seat backwards or forwards:
Press the appropriate part of the switch.
Front of seat cushion up/down
8
To adjust backrest:
Rear of seat cushion up/down
Take your weight off the backrest and turn
Seat up/down
the knob.
Seat forwards/backwards 8
9
Easy entry function:
2
To adjust backrest:
Pull the lever upwards and fold the backrest
Backrest further upright/
forwards; then release the lever and move
further reclined 7
4
the seat forwards.
6
Head restraint up/down
10
To adjust head restraint:
3
To adjust lumbar support:
Press the button on the side of the head
5
Press the appropriate
restraint and move the head restraint up or
part of the switch.
down. The top of the head restraint should
1 2 3 be at eye level or higher.
Starting the engine Automatic gearbox
Switching on the ignition/starting the engine Selector lever positions
Insert the key into the ignition lock. P Parking lock
To switch on the ignition: Turn the key to R Reverse gear
1
position . The glow plugs on diesel
N Neutral
engines start preheating in this
D Drive (forwards)
position.
S Sport position
To start the engine (on vehicles with
To release the selector lever and
manual gearbox): Press the clutch
engage a gear: Switch on the ignition,
2
and turn the key to position until
press the brake pedal, and press the
the engine starts.
interlock button on the selector
To start the engine (on vehicles with
lever. Move the selector lever to
automatic gearbox): Move the selector
D or S to start driving forwards.
lever to position P or N, press the brake
tiptronic: To switch to manual
2
pedal, and turn the key to position until
gear selection mode, push the
the engine starts.
selector lever from position D
0
To switch off the engine: Turn the key to position .
to the right. The gears are
shown on the driver infor-
mation system.
To shift up or down a gear:
Briefly push the selector lever forwards or
backwards.
First steps
Power-operated
soft top
To open the soft top:
Switch on the ignition.
Pull and hold the
switch until
Switches for air conditioner
the soft top is fully
Buttons on left: Temperature To deactivate the air conditioner
open.
selection for left side
Air to the windows
To close the soft top:
Buttons on right: Temperature
Air from the dashboard outlets
Switch on the ignition.
selection for right side
Air to the footwells
Press and hold the
Buttons in centre: Blower speed
switch until the
AUTO
Automatic mode
soft top is fully closed.
Set the desired temperature and
press the button
B
Air recirculation
A
Circulates and filters the air in the
interior of the vehicle
The storage box can be raised in order to
ECON ECON mode
extend the luggage compartment.
Activates/deactivates air cooling
The soft top must be closed!
Variable A
To raise: Slide the lever to position .
B
soft top storage box To lower: Slide the lever to position .
Air conditioner
Windbreak
A
Cruise control
system
2
When the system is switched on, the
indicator lamp appears in the
C
1
instrument cluster.
B
2
To switch on/off: Pull/press lever .
1
To set speed: Press button .
Setting up: To adjust stored speed: Press lever up
B (faster) or down (slower).
p Take the windbreak out of the storage p Press the release catches (left/right)
bag (luggage compartment). and slide the locking pins into the
C
mounting holes at the sides.
p Fold the two side sections outwards.
A p Fold the vertical section of the wind-
p Pull out the retainer pegs (left/right)
break into the fully upright position.
and hold the windbreak in a horizontal
position against the backrest upholstery. Removing:
A
p Slide the retainer pegs (left/right) all Follow the instructions in reverse order.
the way into the mountings.
Technology
1
2
2
Audi Navigation System plus
Components
1
Driver information system
2
Multi-function steering wheel
Scroll the left thumbwheel to select a menu item in the
driver information system. Press the thumbwheel to
confirm the selection.
Press the MODE button to switch between the active audio
source and the navigation and telephone functions.
Scroll the right thumbwheel to adjust the volume. If you
press the right thumbwheel, the last navigation cue will be
repeated.
Operating logic
The operating logic for
accessing the functions is
3
Display always the same.
4
Function selector buttons
Press one of the buttons
(e.g. RADIO) to activate
A
the desired mode.
5 B
ON/OFF button C
To switch on: Press briefly.
To adjust volume: Turn.
To mute: Press briefly.
To switch off: Press and hold.
6
Control buttons
6
3 To activate one of the functions
A
To call up the menu in a
shown in the four corners of
7 corner of the display: Press
the display, press the control
the corresponding button.
button for that corner of the display.
6
B
To select: Turn the rotary
7
Rotary pushbutton
pushbutton.
5
3
To select a menu item on display : C
To confirm: Press the rotary
4
Turn the rotary pushbutton.
pushbutton.
To confirm selection:
Press the rotary pushbutton.
Infotainment
3
2
1
1 2 3
Press the RADIO function selector Turn the rotary pushbutton and select Press the rotary pushbutton to confirm.
button. the desired station.
4
6 8
5 7
4 6 7
Press the control button for  Memory . Press the rotary pushbutton. The next Turn the rotary pushbutton and select
5 free position in the memory list will be the desired memory position.
Turn the rotary pushbutton and, if
highlighted. 8
desired, select  Store  . Press the rotary pushbutton to confirm.
Storing a radio station
Germany
M
MÜNCH-LEU&
3 N 5
MÜNCHAUR&
MÜNCHBERG
DEL MÜNCHEBERG
4
2 LIST
1
1 2 4
Press the NAV function selector button. Turn the rotary pushbutton and select Turn the rotary pushbutton and select
 Town/ZIP . the first letter of the destination town.
3 5
Press the rotary pushbutton to confirm. Press the rotary pushbutton to confirm.
Germany
MÜN MÜNCHEN MÜNCHEN/MÜNCHEN (&
MÜNCH-LEU& MÜNCH-LEU& Centre
N 6 8 10
MÜNCHAUR& MÜNCHAUR&
MÜNCHBERG MÜNCHBERG
DEL MÜNCHEBERG DEL MÜNCHEBERG
7
LIST 9
6 7 9
Repeat the above step to enter the When you have entered the town, turn Select  Start route guidance from the
remaining letters of the destination the rotary pushbutton and select  OK . menu.
town until the name of the desired 8 10
Press the rotary pushbutton to confirm. Press the rotary pushbutton to confirm.
town appears on the display.
The route will be calculated.
Infotainment
Starting the navigation system
Memory cards
Functions
Loading:
Establishing a BluetoothTM connection p Press the button to open the
for a mobile phone display.
You can quickly connect a Bluetooth p Insert the memory card into the reader
mobile phone to the onboard phone slot as shown in the illustration and
system on your navigation system: press in the memory card until you feel
it click into place.
p Switch on the ignition, navigation
system and mobile phone. Removing:
p On your mobile phone, select the menu p Press the button to open the
that looks for Bluetooth devices (e.g. display.
 Hands-free ).
p Press in the memory card. The card will
p On the mobile phone, select  Audi UHV be released and can then be removed
and confirm. from the reader slot.
p Enter the PIN  1234 on your mobile
phone.
©
Bluetooth
Infotainment
Warning and indicator lamps Warning symbols
Turn signals/
Emission control system Fault in the brake system
hazard warning lights
Electronic stabilisation Fault in the cooling
Airbag system1)
program (ESP) system
Engine oil pressure
Cruise control system Alternator1)
too low
Trailer turn signals Main beam headlights Tyre pressure too low
If one of these red symbols lights up in the
Anti-lock brake system1) Engine management1) or
display while you are driving, stop the car
immediately, switch off the engine and refer to
Seat belt warning lamp Glow plug system1) the Owner s Manual.
Fault in brake system or
Power-operated soft top
handbrake is applied
1)
If this warning lamp lights up when driving, please contact a qualified workshop without delay.
© 2007 AUDI AG
AUDI AG reserves the right to alter any part of the vehicle, its equipment and technical specifications.
No legal commitment can be implied by the information, illustrations or descriptions in this publication.
No part of this publication may be reprinted, reproduced or translated without the written permission
of AUDI AG. All rights under the laws of copyright are expressly reserved by AUDI AG. Subject to alteration
and amendment. Concept and layout: Pfriemer GmbH. Printed in Germany.
Warning and indicator lamps
www.audi.com
Audi A4 Cabriolet " S4 Cabriolet
Kurzanleitung
englisch 11.07
282.562.684.20