{Change Comments ***********************************************************}

{
10/24/94 [cwh]
C001.81.4 ( from C001.81.3 )

Made changes to ZOnlyRep and FinishSub1 subs to properly handle
Feed connects and clearance moves.
}

{11/8/94
Modified: Fanuc 6M (PW) C001.81.4
For: Gibbs & Associates
Versions: Catalyst v2.14.12C/Compost 4.21.23
Changes made per Pete Jackson
Charles reported a problem involving operations that do not change coordinate systems from
previous operations.
Added ClearCSOffset at NotSameToolWFO and SameToolWFO subs.
DWB}

{
12/01/94 [TH]
C001.81.6

Changed all CSAngleAC and CSAngleBC calls to CSAngleA and CSAngleB to output the A and B
commands at the start of every operation.
Changed FORMAT command for CSOffsetA# and CSOffsetB# to invert the values
}

{
12/02/94
Changed version number to .00 from .81
TH}

{
Format: Fanuc 6M (PW) C001.00.01
12/08/94
Added AAxisAvail? and BAxisAvail? checks to CSAngleA and CSAngleB subs
Added return to CS1 moves to End2
Added G92 reset of A and/or B axis to End2
TH}

{
Format: Fanuc 6M (PW) C001.00.02
12/09/94
Changed NotSameTool WFO so it would restate the current WFO if no change in CS
TH}

{
Format: Fanuc 6M (PW) C001.00.03
12/19/94
Added ClearCSOffset to OpenMP: CloseMP: and SubCSMP:
Added if AChange? OR BChange? to home postition call-out in SameToolOp1
Started using Flag('3') to determine toggle between incrementing through MPs and decrementing through MPs
Changed CloseMP to check Flag('3'). If true, the WFOs will increment from first to last. If false, the WFOs will
decrement from last to first.
Example:
TRUE for 4 parts: G54P1, G54P2, G54P3, G54P4
FALSE for 4 parts: G54P4, G54P3, G54P2, G54P1
This is most useful for tombstone machining on rotary tables. With this method, the code will machine part1, rotate, part2,
rotate, part3, rotate, part4, tool change, part4, part3, part2, part1, toolchange, etc. It minimizes the rotation and also
stops the machine from "winding up".
To do this a new sub was created called ToggleIncDecWFO. The flag is set to true in ProgStart and toggled inside CloseMP
after running through the parts
Replaced SetZRepInc and RestoreAbsOrInc with one sub called DoAbsOrInc. Any line with SetZRepInc now
has DoAbsOrInc as the first command after the SeqC.
TH}

{
Format: Fanuc 6M (PW) C001.00.04
1/10/95
NewToolOp3 now has an AbsOrInc on the line that calls out the Plane 'G80' CRCOff
NewToolOp5 no longer has the AbsOrInc command
NewToolOp5b has been created and has the AbsOrInc command
Changed MP1ToollAllPfu to call NewToolOp5b
Added AbsOrInc and Rapid to the FirstOperation? section of MP1ToollAllPXcp
Added Rapid to the NewTool? section of MP1ToollAllPXcp
Started using Flag ('4') to turn on Inc/Dec WFO's (See above). True means use Inc/Dec WFO's.
MP1ToollAllPXcp, MP1ToollAllPFU, and MPallTools1P now output WFO if NOT WorkFixtureOffsets?
TH}

{
Format: Fanuc 6M (PW) C001.00.05
1/13/95
Replaced TrackZNO# ZDepth# with TrackZNO# FIRST SPZ# in the drilling section
Formatted TrackZNO# to #4
}

{ Added ClearCSOffset to SubCSMP TH}

{7/20/95
Initial: Fanuc 6M (PW) C001.00.06
Created: Fanuc 6M (PW) C001.00.07
Comment: Changed 'G' NewWFO# to CSWFO in NotSameToolWFO per B001.00.07
NewWFO# was calling WFO1. Perhaps this sub can be simplified at a later date!?
Jim Radcliffe}

{8/15/95
Initial: Fanuc 6M (PW) C001.00.07
Created: Fanuc 15M MS C000.00.07
ForUser: CNCCS / Twigg
Control: Fanuc 15M
Machine: Mori Seiki
Develop: ComPost 4.21.32, Virtual v.2.20
Comment: New Post Processor per edited output from and conversation with Dalton Harwell
Modified WFO output, I need to get the WFO on the same line as the StrtPos:
Expanded NotSameToolWFO sub to include Multiple Parts WFO statements.
Expanded NotSameToolWFO sub to include SameToolWFO stuff.
Changed name of NotSameToolWFO to WFOStuff (I liked that style of WFO handling!).
Changed WFO1 statment in MPallTools1P, MP1ToollAllPfu & MP1ToollAllPfu subs to WFOStuff.
Changed SameToolWFO calls to WFOStuff calls.
Moved DoCSWFOComment call to DoOpComments to have all the comments output in 1 place
Moved WFOStuff to StrtPos line in its respective subs.
Added AbsOrInc to NewToolOp5.
Changed calls to NewToolOp5b to NewToolOp5.
Deleted NewToolOp5b
Moved Speed SpinOn to StrtPos line. Deleted FirstOp2 & NewToolOp4.
Added PreTool.
Moved SpinOff to OfstOff line.
Rigid Tapping.
Misc other minor format changes.
Jim Radcliffe}

{1/17/96, Updated .10 to .11 version, MPK}

{3/25/96, Tested ZOnlyRepAutoCycle, Changed version # to .12, MPK}

{1/15/97,
Initial: Fanuc 15M [TC] C861.12
Created: Fanuc 15M [TC] C861.12.1
Modified CSAngleA and CSAngleB subs to not output rotational move greater than 360Ą,
Modified End2 sub to correctly test for rotational move (per M001.14), if the current angle
at program end in not equal to 0, the post now outputs an 'A0.' or 'B0.', since the angle will never be greater than 360Ą, MPK}

{Prog Numeric Format Definitions ****}

#1 = '#.00'
#2 = '###.###;0.'
#3 = '*###.###;0.'
#4 = '####.####;0.'
#5 = '#######0'
#6 = '####^##0'
#7 = '#####.##;0.'
#8 = '*#####.##;0.'

FORMAT(FileFeet#,1)
FORMAT(FileMeters#,1)
FORMAT(CSOffsetX#,4)
FORMAT(CSOffsetY#,4)
FORMAT(CSOffsetZ#,4)
FORMAT(ToolDiameter#,4)
FORMAT(ADD#,5)
FORMAT(CS#,5)
FORMAT(Program#,5)
FORMAT(Operation#,5)
FORMAT(Tool#,5)
FORMAT(NewWFO#,5)
FORMAT(Parts#,5)
FORMAT(Dwell#,6)
FORMAT(CSOffsetA#,8)
FORMAT(CSOffsetB#,8)
FORMAT(SUB#,8)
FORMAT(TrackZNO#,4)

{Prog Subroutines ****}

CSWFO:
'G' ADD# CS# SUB# NewWFO# Num#('1')
RETURN

CalcCSWFO: {(iPart-1)*NumOfCS#)}
'G' ADD# MUL# NumOfCS# SUB# PartNum# Num#('1') ADD# CS# SUB# NewWFO# Num#('1')
RETURN

CSAngleA:
IF AAxisAvail?
'A'
Save# Num#('1') TRUNC# DIV# CSOffsetA# Num#('360')
IF LessThan? CSOffsetA# Num#('0')
Save# Num#('1') SUB# Recall# Num#('1') Num#('1')
END
SUB# CSOffsetA# MUL# Recall# Num#('1') Num#('360')
END
RETURN

CSAngleAC:
IF AChange?
CSAngleA
END
RETURN

CSAngleB:
IF BAxisAvail?
'B'
Save# Num#('1') TRUNC# DIV# CSOffsetB# Num#('360')
IF LessThan? CSOffsetB# Num#('0')
Save# Num#('1') SUB# Recall# Num#('1') Num#('1')
END
SUB# CSOffsetB# MUL# Recall# Num#('1') Num#('360')
END
RETURN

CSAngleBC:
IF BChange?
CSAngleB
END
RETURN

DoCSWFOComment:
'( CS#' CS# ' - ' CSComment$ ' )' EOL
'( ' CalcCSWFO '= X' CSOffsetX# ' Y' CSOffsetY# ' Z' CSOffsetZ# ' )' EOL
RETURN

RestoreScale:
IF Metric? {CAM file is in Metric, tools and tool path}
SetScale('.03937007874') { change to English, this is an English post}
END
RETURN

DoSubComment:
IF UseComments? AND SubComment?
'( SUB NUMBER: ' Program# ' )' EOL
END
RETURN

DoOpComments:
IF UseComments?
SetScale('1')
IF OperationIDComment?
'( OPERATION ' Operation# ': ' OperationType$ ' )' EOL
END
IF OperationComment?
'( ' OperationComment$ ' )' EOL
END
IF WorkGroupComment?
'( ' WorkGroupComment$ ' )' EOL
END
IF ToolTypeComment?
'( TOOL ' Tool# ': ' ToolDiameter# ' ' ToolType$ ' )' EOL
END
IF ToolComment?
'( ' ToolComment$ ' )' EOL
END
RestoreScale
IF NOT MultipleParts?
IF WFOCS?
IF ChangeCS?
DoCSWFOComment
END
END
END
END
RETURN

DoPostScript:
EachPS
SeqC PostScript EOL {literals}
NextPS
RETURN

DoEndOpPS:
EachEOPS
SeqC EndOpPS EOL {literals}
NextPS
RETURN

EntryMove:
IF FeedEntry?
SeqC Feed ZIn FeedEnt EOL
ELSE
SeqC RapidC ZIn EOL
END
RETURN

StartSub:
OpenSub
ASCII('13')
SubID EOL
DoSubComment
RETURN

SubWarning:
IF NOT FeedConnect?
IF AnyZshift?
' ' EOL
'( WARNING Z CLEARANCE WILL CHANGE WITH EACH CYCLE OF SUB REPEAT )' EOL
' ' EOL
END
END
RETURN

StdSub:
SeqC SubCall CallLab RepLab RepCycs EOL
StartSub
RETURN

FinishSub1: {part 1}
SeqC CRCOffC
IF NOT FeedConnect?
IF AutoCycle?
ZCP3C
ELSE
IF FIFO?
FeedC ZCP3C FeedEntC
ELSE
RapidC ZCP3C
END
END
END
EOL
RETURN

FinishSubG92: {part 2}
SeqC Preset ShiftRC EOL
SeqC EndSub EOL
CloseSub
SeqC Preset UnshftRC EOL
RETURN

ToggleIncDecWFO:
IF Flag?('3')
SetFlagF('3')
ELSE
SetFlag('3')
END
RETURN

OpenMP:
IF WFOCS?
NewProg
StartSub
SaveCSProg
SaveCSOpStart
ClearCSOffset
ELSE
NewProg
IF WorkFixtureOffsets?
NewWFO
EachWFO {simple eachPart}
SeqC SetWFO EOL
SeqC SubCall CallLab RepLab OnePart EOL
IncWFO
NextWFO {simple NextPart}
ELSE
SeqC SubCall CallLab RepLab Parts EOL
END
StartSub
END
RETURN

CloseMP:
IF WFOCS?
SeqC EndSub EOL
CloseSub
IF Flag?('3')
NewWFO
EachWFO {simple eachPart}
EachCSOp
DoCSWFOComment
ClearCSOffset
SeqC CalcCSWFO EOL
SeqC SubCall CallLabB CSSubID# RepLab OnePart EOL
NextCSOp
ClearCSOffset
IncWFO
NextWFO {simple NextPart}
ELSE
LastWFO
EachWFO {simple eachPart}
EachCSOp
DoCSWFOComment
ClearCSOffset
SeqC CalcCSWFO EOL
SeqC SubCall CallLabB CSSubID# RepLab OnePart EOL
NextCSOp
ClearCSOffset
DecWFO
NextPrevWFO {simple NextPart}
END
IF Flag?('4')
ToggleIncDecWFO
END
ELSE
IF WorkFixtureOffsets?
SeqC EndSub EOL
CloseSub
SeqC WFO1 EOL
ELSE
SeqC Preset ShiftPC EOL
SeqC EndSub EOL
CloseSub
SeqC Preset UnshftPC EOL
END
END
RETURN

SubCSMP:
IF WFOCS?
IF ChangeCS?
SeqC EndSub EOL
CloseSub
NewProg
StartSub
SaveCSProg
END
ClearCSOffset
END
RETURN

DoAbsOrInc:
IF Flag?('1') AND ZMove? AND AbsoluteMoves? AND NOT Flag?('2')
IncValue
SetFlag('2')
ELSE
IF Flag?('1') AND Flag?('2') AND NOT ZMove? AND AbsoluteMoves?
AbsValue
SetFlagF('2')
END
END
RETURN

FormatArc:
DoAbsOrInc
IF ArcCW?
CWArcC
ELSE
CCWArcC
END
MoveXYZC
IF ArcIJFormat?
ArcIJC
ELSE
ArcRC
END
RETURN

StdLine: {enables CRC on first call}
IF Decelerate?
IF RoomToDecel?
DecelMove1
SeqC DoAbsOrInc CRCOnC FeedC MoveXYZC FeedRateC CRCOffsetC EOL
DecelMove2
END
SeqC DoAbsOrInc CRCOnC FeedC MoveXYZC DecelFeed CRCOffsetC EOL
ELSE
IF XMove? OR YMove? OR ZMove?
SeqC DoAbsOrInc CRCOnC FeedC MoveXYZC FeedRateC CRCOffsetC EOL
END
END
RETURN

ToolPath:
ResetCRCNum
EACHFeat
IF PointFeat?
IF AutoCycle?
SeqC MoveSXYC EOL
SeqC SubCall CallLab EOL
CalcACSRXY {calc tool position after sub call, CalcAutoCycleStatusRecordXY}
ELSE
SeqC MoveSXYZC EOL
END
ELSE
IF RapidFeat?
IF LastFeat? AND AutoCycle?
SeqC DoAbsOrInc CRCOffC RapidC MoveXYZC EOL
ELSE
IF XMove? OR YMove? OR ZMove?
SeqC DoAbsOrInc RapidC MoveXYZC EOL
END
END
ELSE
IF LineFeat?
IF AutoCycle?
IF LastFeat?
SeqC DoAbsOrInc CRCOffC FeedC MoveXYZC FeedRateC EOL
ELSE
IF ZMove? {skip CRCOn until first non-Z move line, skipping ramps}
SeqC DoAbsOrInc FeedC MoveXYZC FeedRateC EOL
ELSE
StdLine {enables CRC on first call}
END
END
ELSE
StdLine
END
ELSE
IF ArcFeat?
EACHQuadrant { Do not use NOT, FIRST, LAST or NEXT modifiers in this loop }
IF LastQuadrant? AND Decelerate?
IF RoomToDecel?
DecelMove1
SeqC FormatArc ArcFeedC EOL
DecelMove2
END
SeqC FormatArc DecelFeed EOL
ELSE
SeqC FormatArc ArcFeedC EOL
END
NEXTQuadrant
END
END
END
END
NEXTFeat
RETURN

AutoCycCutSub1: {part 1}
SaveSubStatus {save tool position}
SetPass1 {element cut moves}
StartSub
SetSRXYtoSP
Seq IncValue EOL
RETURN

AutoCycCutSub2: {part 2}
ToolPath
SeqC AbsOrInc
IF Repeats? AND FeedConnect? AND ZshiftOnly?
{removed RapidC}
{removed CRCOffC, gets turned off in ToolPath}
ELSE
IF FIFO?
FeedC ZCP2 FeedEntC
ELSE
RapidC ZCP2
END
END
EOL
SeqC EndSub EOL
CloseSub
SetSRSubXY {restore SR to 1st position value}
SetSRSubMove
RETURN

AutoCycPat:
SetPass2 {position pattern}
ToolPath {call after NewProg for correct sub calls}
SetPass1 {reset}
RETURN

Milling:
IF AutoCycle?
NewProg
AutoCycCutSub1
EntryMove
AutoCycCutSub2
AutoCycPat
ELSE
EntryMove
ToolPath
END
RETURN

G92Sub:
SubWarning
StdSub
SeqC AbsOrInc Connect StrtPos EOL
Milling
FinishSub1
FinishSubG92
RETURN

ZonlyRepAutoCycle:
AutoCycPat {write pattern moves and main calls}
StartSub
NewProg
EachCycle
SetSRXYtoEP
IF FeedConnect?
IF NOT FirstCycle?
IF SPXMove? OR SPYMove?
SeqC Feed IncValue StrtPosC EOL
SeqC AbsOrInc
ELSE
SeqC Feed
END
ELSE
SeqC Feed
END
ZInPlusInc FeedEnt EOL
ELSE
IF NOT FirstCycle?
IF SPXMove? OR SPYMove?
SeqC Rapid IncValue StrtPosC EOL
IF FeedEntry?
SeqC AbsOrInc ZCP2PlusInc EOL
SeqC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqC AbsOrInc ZInPlusInc EOL
END
ELSE
IF FeedEntry?
SeqC Rapid ZCP2PlusInc EOL
SeqC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqC Rapid ZInPlusInc EOL
END
END
ELSE
IF FeedEntry?
SeqC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqC Rapid ZInPlusInc EOL
END
END
END
IF FirstCycle?
SetStatusOff {protect Z position for incremental sub}
END
SeqC SubCall CallLab EOL
NextCycle
SetStatusOn
AutoCycCutSub1 {build element sub}
AutoCycCutSub2
IF FeedConnect? {there is no Z up in the sub}
IF FIFO?
SeqC Feed ZCP2 FeedEnt EOL
ELSE
SeqC Rapid ZCP2 EOL
END
END
SeqC EndSub EOL
CloseSub
{Element shift, not pattern}
RETURN

ZonlyRep:
SetFlag('1') {std sep sub Zreps are in effect} {rep change 2}
EachCycle
IF NOT FirstCycle?
SeqC Connect StrtPos EOL {added Connect}
END
IF FeedConnect?
SeqC FeedC ZInPlusInc FeedEnt EOL {changed to FeedC}
ELSE {Entry/Exit Connect}
IF FeedEntry?
IF NOT FirstCycle?
SeqC RapidC ZCP2PlusIncC EOL {can't call for cycle =1} {added Rapid, reads better} {.71.2, changed to RapidC, reads better}
END
SeqC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqC RapidC ZInPlusInc EOL {added Rapid, reads better} {changed to RapidC, reads better}
END
END
SeqC SubCall CallLab EOL
NextCycle
StartSub
TrackZNO# FIRST SPZ#
ToolPath
FinishSub1
SeqC EndSub EOL
CloseSub
RETURN

CheckPass:
IF AutoCycle? {use the correct StrtPos}
SetPass2
ELSE
SetPass1
END
RETURN

ProgStart:
InitProg
ReverseXZArcs
InitWFONum
SetFlood
SetFlagF('1') {not std sep sub Zreps in effect} {rep change 2}
IF AbsoluteMoves?
SetFlagF('2')
ELSE
SetFlag('2')
END
SetFlag('3') {True = incrementing WFO numbers for MP. False = decrementing WFO numebrs for MP}
SetFlag('4') {True = toggle between incrementing/decrementing WFO's }
UseSeparateSubCalls
SetMaxSeparateSubCalls('50')
SetMaxRPM('10000')
SetMaxFeed('500')
IF PSComment? AND UseComments?
'PostScript:' EOL
' Literals: put between single or double quotes.' EOL
' Separate commands and literals with at least one space.' EOL
' A CR ( RETURN key ) will start a new line.' EOL
' Commands: may be capital and/or lower case letters. Separate commands with a space.' EOL
' EndOP -' EOL
' all literals and commands before an ENDOP command' EOL
' will appear at the beginning of the operation. All ' EOL
' literals and commands after an ENDOP command will appear' EOL
' at the end of the operation. ' EOL
END

IF MultipleParts?
IF WorkFixtureOffsets?
IF LTEqual? MUL# Parts# NumOfCS# Num#('6')
SetWFOCS { use WFO for CS changes }
ELSE
IF UseComments?
'( Not enough Work Fixture Offsets to handle this part. )' EOL
'( Number of parts [ ' Parts# ' ] times CSs [ ' NumOfCS# ' ] )' EOL
'( exceeds the machine limit. Switching to non-WFO output. )' EOL
END
END
END
ELSE
IF LTEqual? NumOfCS# Num#('6') {****}
SetWFOCS { use WFO for CS changes }
ELSE
IF UseComments?
'( Not enough Work Fixture Offsets to handle this part. )' EOL
'( Number of CSs [ ' NumOfCS# ' ] exceeds the machine limit. )' EOL
'( Switching to non-WFO output. )' EOL
END
END
END
RETURN

OpGuts:
IF Milling?
SeqC ZCP2C EOL
IF Repeats?
NewProg
IF ZshiftOnly?
IF AutoCycle? {incremental Autocycle sub can have Z moves}
ZonlyRepAutoCycle
ELSE {Z shift only, NOT Auto Cycle}
IF UseSeparateSubCalls? AND CyclesLessThanMaxSubCalls?
ZonlyRep {rep change 1}
ELSE {no sep subs desired}
G92Sub
END
END {end Auto Cycle IF}
ELSE {not Z only}
G92Sub
END {end Z only IF}
ELSE {no repeat OPs}
Milling
END
IF AutoCycle?
SeqC ZCP3C EOL
ELSE
IF FIFO?
SeqC FeedC CRCOffC ZCP3C FeedEntC EOL
ELSE
SeqC RapidC CRCOffC ZCP3C EOL
END
END
ELSE
IF Drilling?
IF Repeats?
NewProg
StdSub
SeqC AbsOrInc Rapid StrtPos EOL
END
SeqC DrillCP EOL
GetCycle
IF Tap? AND OptCyc1?
SeqC 'G84.2' FromCP StrtPos ZDepth RLevel Dwell Peck Retract Speed 'M42' FeedEnt EOL
ELSE
SeqC Cycle FromCP StrtPos ZDepth RLevel Dwell Peck Retract FeedEnt EOL
END
TrackZNO# FIRST SPZ#
ToolPath
IF RetractToCP1?
TrackZNO# ClearancePlane1#
ELSE
TrackZNO# ClearancePlane2#
END
SeqC 'G80' EOL
IF Repeats?
FinishSubG92
END
SeqC RapidC ZCP3C EOL
END
END
SetFlagF('1') {not std sep sub Zreps in effect} {rep change 3}
RETURN

WFOStuff:
IF MultipleParts?
IF NOT WorkFixtureOffsets?
WFO1
END
ELSE
IF WFOCS?
IF ChangeCS?
ClearCSOffset
CSWFO
ELSE
ClearCSOffset { 11/8/94 }
IF NOT SameTool?
CSWFO { 7/20/95 }
END
END
ELSE
IF NOT SameTool?
IF NeedWFO1?
'G' NewWFO#
END
END
END
END
RETURN

InitOp:
EOR EOL
ProgID1
IF UseComments? AND ProgramNameComment?
'( PROGRAM: ' ProgramName$ ' )'
END
EOL
IF ToolChangeAtHome?
SetHome
END
IF UseComments?
IF ProgramComment?
'( ' ProgramComment$ ' )' EOL
END
IF FormatNameComment?
'( FORMAT: ' FormatName$ ' )' EOL
END
IF TimeComment?
'( ' Date$ ' AT ' Time$ ' )' EOL
END
IF MovesComment?
'( OUTPUT IN ' MoveType$ ' INCHES )' EOL
END
IF PartsComment?
'( PARTS PROGRAMMED: ' Parts# ' )' EOL
END
IF StartToolComment?
'( FIRST TOOL NOT IN SPINDLE )' EOL
END
END
OpenSub
RestoreScale
RETURN

FirstOp1:
Seq OpToolID EOL
SeqC ToolChng EOL
DoOpComments
DoPostScript
RETURN

FirstOp3:
CheckPass
SeqC AbsOrInc WFOStuff Plane Rapid StrtPos CSAngleA CSAngleB Speed SpinOn EOL
SeqC OfstOn PreTool EOL
SeqC CoolOn EOL
RETURN

FirstOp3a: {can't XY position before WFO}
SeqC Speed SpinOn EOL
CheckPass
SeqC OfstOn PreTool EOL
SeqC CoolOn EOL
RETURN

NewToolOp1:
SeqC CoolOff EOL
SeqC IncValue OfstOff SpinOff EOL
RETURN

NewToolOp1a:
SeqC CoolOff EOL
SeqC IncValue OfstOff EOL
RETURN

NewToolOp1b:
SeqC SpinOff EOL
RETURN

NewToolOp2:
DoEndOpPS
IF ToolChangeAtHome?
SeqC AbsOrInc Rapid Home EOL
END
IF LAST ProgStop?
SeqC 'M0' EOL
ELSE
SeqC ProgStop EOL
END
RETURN

NewToolOp3: {Start new Operation}
Seq OpToolID EOL
SeqC ToolChng EOL
DoOpComments
DoPostScript
RETURN

NewToolOp5:
CheckPass
SeqC AbsOrInc WFOStuff Plane Rapid StrtPos CSAngleA CSAngleB Speed SpinOn EOL
SeqC OfstOn PreTool EOL
SeqC CoolOn EOL
RETURN

NewToolOp5a:
SeqC Speed SpinOn EOL
CheckPass
SeqC OfstOn PreTool EOL
SeqC CoolOn EOL
RETURN

SameToolOp1:
DoEndOpPS
IF LAST ProgStop?
SeqC CoolOff EOL
SeqC IncValue OfstOff SpinOff EOL
SeqC 'M0' EOL
ELSE
IF CoolOff? AND LAST NOT CoolOff?
SeqC CoolOff EOL
END
IF NewToolOffset?
SeqC IncValue OfstOff EOL
ELSE
IF ChangeCS?
IF AChange? OR BChange?
SeqC IncValue OfstOff EOL
END
END
END
END
RETURN

SameToolOp2: {Start new Operation}
DoOpComments
DoPostScript
CheckPass
RETURN

SameToolOp3: {Start new Operation}
IF LAST ProgStop?
SeqC AbsOrInc WFOStuff PlaneC Rapid StrtPos CSAngleA CSAngleB SpeedC SpinOn EOL
SeqC OfstOn EOL
SeqC CoolOn EOL
ELSE
SeqC AbsOrInc WFOStuff PlaneC Rapid StrtPos CSAngleA CSAngleB SpeedC EOL
IF NewToolOffset?
SeqC OfstOn EOL
ELSE
IF ChangeCS?
IF AChange? OR BChange?
SeqC OfstOn EOL
END
END
END
IF NOT CoolOff? AND LAST CoolOff?
SeqC CoolOn EOL
END
END
RETURN

End1:
SeqC CoolOff EOL
SeqC IncValue OfstOff EOL
RETURN

End2:
DoEndOpPS
IF FIRST ToolChangeAtHome? {added FIRST modifier}
SeqC WFO1 EOL
SeqC AbsOrInc Rapid FirstHome SpinOff EOL
ELSE
SeqC SpinOff EOL
END

IF Equal? CSOffsetA# Num#('0') AND Equal? CSOffsetB# Num#('0')
ELSE
IF AAxisAvail?
SeqC 'A0.'
END
IF BAxisAvail?
SeqC 'B0.'
END
EOL
END
IF ProgStop?
SeqC 'M0' EOL
END
RETURN

End3:
SeqC EOP EOL
CloseSub
Post2 {organize Subs into one program}
EOR EOL
Close
IF UseComments?
SetScale('1') {restore scale for comments}
Reopen
IF FileBytesComment?
'( FILE LENGTH: ' FileBytes# ' CHARACTERS )' EOL
END
IF FileFeetComment?
'( FILE LENGTH: ' FileFeet# ' FEET )' EOL
END
IF FileMetersComment?
'( FILE LENGTH: ' FileMeters# ' METERS )' EOL
END
Close
END
RETURN

MPallTools1P: {Multiple Parts, All Tools 1 Part}
EachOp {Start of post processing}
IF FirstOperation?
InitOp
OpenMP
FirstOp1
FirstOp3
ELSE
IF NewTool?
NewToolOp1
NewToolOp2 {to tool change, CS problem}
SubCSMP
NewToolOp3
NewToolOp5
ELSE {implied SameTool?}
SameToolOp1
SubCSMP
SameToolOp2
SameToolOp3
END
END {common point for all operations}
OpGuts
NextOp {loops back to EachOP until last Operation}
End1 {End of program}
End2
CloseMP
End3
RETURN

MP1ToollAllPfu: {Multiple Parts, 1 Tool all Parts, full up}
EachOp {Start of post processing}
IF FirstOperation?
InitOp
FirstOp1
OpenMP
FirstOp3
ELSE
IF NewTool?
NewToolOp1a
CloseMP
NewToolOp1b
NewToolOp2 {to tool change, CS problem}
NewToolOp3
OpenMP
NewToolOp5
ELSE {implied SameTool?}
SameToolOp1
SubCSMP
SameToolOp2
SameToolOp3
END
END {common point for all operations}
OpGuts
NextOp {loops back to EachOP until last Operation}
End1 {End of program}
CloseMP
End2
End3
RETURN

MP1ToollAllPXcp: {Multiple Parts, 1 Tool all Parts, exit Clearance plane}
EachOp {Start of post processing}
IF FirstOperation?
InitOp
FirstOp1
FirstOp3a
OpenMP
SeqC AbsOrInc WFOStuff Rapid StrtPos EOL
ELSE
IF NewTool?
CloseMP
NewToolOp1
NewToolOp2 {to tool change, CS problem}
NewToolOp3
NewToolOp5a
OpenMP
SeqC WFOStuff Rapid StrtPos EOL
ELSE {implied SameTool?}
SameToolOp1
SubCSMP
SameToolOp2
SameToolOp3
END
END {common point for all operations}
OpGuts
NextOp {loops back to EachOP until last Operation}
CloseMP {End of program}
End1
End2
End3
RETURN

NoMPs: {no multiple parts}
EachOp {Start of post processing}
IF FirstOperation?
InitOp
FirstOp1
FirstOp3
ELSE
IF NewTool?
NewToolOp1
NewToolOp2
NewToolOp3
NewToolOp5
ELSE {implied SameTool?}
SameToolOp1
SameToolOp2
SameToolOp3
END
END {common point for all operations}
OpGuts
NextOp {loops back to EachOP until last Operation}
End1 {End of program}
End2
End3
RETURN

{Start of executable Prog, top level ****}

ProgStart {setup and initializations}

IF MultipleParts?
IF AllToolsOnePart?
MPallTools1P
ELSE {implied OneToolAllParts?}
IF FullUp?
MP1ToollAllPfu
ELSE {implied ExitClearancePlane?}
MP1ToollAllPXcp
END
END
ELSE
NoMPs
END