QUALITY REQUIREMENTS
European (internationalb) standards for fusion welding Destructive testing
for weldinga
Other continued
Impact EN ISO 9016
Arc welding Copper Nickel Titanium & Zirconium
EN ISO 3834
Steel Aluminium
ISO 2553
Symbolic repr.
EN ISO 9606-3 EN ISO 9606-4 EN ISO 9606-5
Tensile long. EN ISO 5178
CEN ISO/TR 15608, 20172, 20173, 20174
Grouping of materials
EN ISO 4063
Proc. numbers
EN ISO 4136
Tensile perp.
Gas welding Electron beam welding Laser welding
Welder qualification EN ISO 9606-1 EN ISO 9606-2
CEN/TR 14599
Terms & Def.
EN ISO 9018
EN ISO 15609-2 EN ISO 15609-3 EN ISO 15609-4 (ISO/TR 25901) Tensile cruc.
EN ISO 15609-1
WPS
EN ISO 5173
EN 14610
Def. weld proc. Bend
Welding procedure qualification EN ISO 15607, 15610, 15611, 15612, 15613 Cast iron Titanium & Zirconium Copper
Terms on joints
EN ISO 9017
EN ISO 17659 Fracture
EN ISO 15614-3 EN ISO 15614-5 EN ISO 15614-6
& welds
EN ISO 15614-1 EN ISO 15614-2 & -4
EN ISO 9015-1 & -2
EN ISO 13920 Hardness
Tolerances
Welding operator qualification EN ISO 14732
Overlay welding Tube to tube plate Beam welding
Macroscopic EN ISO 17639,
Welding EN ISO 6947,
EN ISO 15614-7 EN ISO 15614-8 EN ISO 15614-11 CR 12361 (ISO/TR 16060)
positions CEN/TR 14633
NDT-personnel EN ISO 9712
Hot crack
EN ISO 17641-1, -2 & -3
Reinforcing steel
EN ISO 14731 EN ISO 17660
Welding coordination
Clad steel Laser Electron beam Cast iron
Cold crack EN ISO 17642-1, -2 & -3
Inspection & testing during welding EN 1011-5 EN 1011-6 EN 1011-7 EN 1011-8
EN ISO 13916
(ISO/TR 17671-5) (ISO/TR 17671-6) (ISO/TR 17671-7) (ISO/TR 17671-8)
- Measurement of preheat and Welding consumables
Delta ferrite EN ISO 17655
interpass temp.
EN 1011-2 & -3 EN 1011-4
EN 13479
Product
(ISO/TR 17671-2 & -3) (ISO/TR 17671-4)
- Recommendations for welding Environment, health & safety
Quality req. for
- Comparison of methods for
Fume sampling in EN ISO 15011-1 till -4 & CEN EN 12074
CEN ISO/TR 17844)
avoidance of cold cracks
Acceptance levels for NDT
laboratory ISO/TR 15011-5 manufacturing
Technical deli-
EN ISO 544
EN ISO 17635
Inspection & testing after welding
Fume sampling in very conditions
Radiography EN ISO 10675-1 & -2
EN ISO 10882-1 & -2
- NDT  General rules
breathing zone
EN ISO 17637 Procurement
EN ISO 14344
- Visual testing
Ultrasonic EN ISO 11666,
Filters EN ISO 15012-1 & -2
EN ISO 17636-1 & -2
Type testing EN 14532-1, -2 & -3 15626, 22825, 23279
- Radiographic testing
EN 169, 170, 171, 175 & 379
EN ISO 17640, 10863, 13588 & 22825 Eye protection
- Ultrasonic testing
Testing
EN ISO 15792-1, -2 & -3, 6847, 14372, EN ISO 23278
Magnetic particle
8249, 3690 & ISO 2401
EN ISO 17638
- Magnetic particle testing
EN ISO 11611, EN 12477
Protective clothing
EN ISO 23277
Penetrant
- Macro- & microscopic testing
EN ISO 17639
TIG-electrodes EN ISO 6848
Welding curtains EN 1598
- Penetrant testing (general)
Visual testing (+ For all imperfections EN ISO
EN ISO 3452-1
Hard facing EN 14700 macro/micro etc) 5817 etc apply
Environm. checklist EN 14717
Post-weld heat treatment EN ISO 17663
Classification of welding consumables
Calibration/validation EN ISO 17662
Steel Other materials
Quality levels & Joint preparation
Non-alloy and High strength Creep resistant Stainless and Nickel Copper Aluminium Cast iron Titanium
fine grain heat resisting
Steel Aluminium
Qual.lev. fusion welding (not beam)
EN ISO 5817 EN ISO 10042
EN ISO prEN ISO
MMA EN ISO 2560 EN ISO 18275 EN ISO 3580 EN ISO 3581
14172 17777
Quality levels for beam welding
EN ISO 13919-1 EN ISO 13919-2
EN ISO
MIG/MAG EN ISO 14341
1071
Quality levels for cutting
EN ISO 9013
EN ISO EN ISO EN ISO EN ISO EN ISO
16834 21952 24373 18273 24034
EN ISO EN ISO
Joint preparation
EN ISO 9692-1 & -2 EN ISO 9692-3
TIG EN ISO 636
14343 18274
Other
Electrodes etc for EN ISO EN ISO EN ISO
submerged arc 14171 26304 24598
Joint details Pressurized comp. / Steel constr. EN 1708-1 & -3 / -2 (ISO  missing )
Fluxes for
EN ISO 14174
Geometric imperfections - Fusion welding / Pressure welding EN ISO 6520-1 / -2
submerged arc
Definitions
EN ISO EN ISO EN ISO EN ISO
Thermal cuts
EN 12584 (ISO 17658)
Cored wires EN ISO 17632
18276 17634 17633 12153
EN ISO
Designation system CEN ISO/TS 17845 1071
EN 12536 EN 12536
Gas welding
See continued (ISO/DIS 20378) (ISO/DIS 20378)
a
Shielding gas EN ISO 14175
References in fields with this colour are directly linked to EN ISO 3834
b
The ISO-reference in brackets is in most cases identical with or is based on corresponding EN
Update available at www.svets.se/overview Mathias Lundin, Swedish Welding Commission, May 2016