Ordering number : EN6028
Infrared LED
SPI-315-34
SPI-315-34
Ultraminiature photoreflector
(single-transistor type)
Features
" Infrared LED plus Phototransistor (single)
" DIP type
" Compact type : 3.4 (L) 2.7 (W) 1.5 (H) mm
" Visible light cut type
" Lead length : (L=3.5mm)
Absolute Maximum Ratings at Ta=25°C, 65%RH
Parameter Symbol Rating Unit
Forward Current IF 50 mA
Reverse Voltage VR 5V
Input LED
Power Dissipation PD 70 mW
Collector-Emitter Voltage VCEO 20 V
Output
Emitter-Collector Voltage VECO 5V
Phototransistor
Collector Curren IC 20 mA
Power Dissipation PC 70 mW
Operating Temperature Topr --20 to +80 °C
Storage Temperature Tstg --30 to +100 °C
Soldering Temperature *1 Tsol 260 °C
*1
Soldering conditions : time : max. 3sec; clearance : min. 1mm from lower case edge.
Electro-Optical Characteristics at Ta=25°C, 65%RH
Parameter Symbol Condition Min. Typ. Max. Unit
Forward Voltage VF IF=10mA 1.0 1.2 1.6 V
Input
Reverse Current IR VR=5V -- -- 10 µA
Output Dark Current ICEO IF=0mA, VCE=10V -- -- 200 nA
Collector Output Current IC IF=10mA, VCE=5V*1 80 -- 1100 µA
Leakage Current ILEAK IF=10mA, VCE=5V*2 -- -- 1 µA
Collector Emitter
Coupled
VCE(sat) IF=10mA, IC=50µA -- -- 0.5 V
Saturation Voltage
Rise Time tr -- 5 -- µs
VCC=5V, RL=100&!
IC=1mA
Fall Time tf -- 5 -- µs
*1
Location of reflector is shown in Fig. 1.
*2
No reflector
AL V.E. film
*3
Table of Classification of Collector Output
Glass plate (t : 1mm)
Class A B C D
Ic (µA) 1100 to 450 600 to 260 350 to 150 200 to 80
Fig. 1 Location of Reflector
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
( )
72199 GI, MI No.6028 1/6
SPI-315-34
Typical Characteristics
CAUTION
These numerical value show the electrical and optical characteristics of this product, and not assure this contents.
Forward Current vs. Ambient Temperature Power Dissipation vs. Ambient Temperature
60 120
(Rating) (Rating)
50 100
40 80
30 60
20 40
10 20
0 0
--25 0 25 50 75 100 --25 0 25 50 75 100
Ambient Temperature Ta (°C) Ambient Temperature Ta (°C)
Forward Current vs. Forward Voltage
Collector vs. Forward Current
500 500
VCE=5V
Ta=75°C Ta=25°C
400
50°C
100
25°C
50
0°C 300
--25°C
200
10
5
100
1 0
0 0.5 1 1.5 2 0 4 8 12 16 20
Forward Voltage VF (V)
Forward Current IF (mA)
Collector Current vs. Collector-emitter Voltage Relative Collector Current vs. Ambient Temperature
1000 140
Ta=25°C IF=10mA
VCE=5V
800 120
IF=20mA
600 100
15mA
400 80
10mA
200 60
5mA
0 40
05 10 --25 0 25 50 75 100
Collector-emitter Voltage VCE (V) Ambient Temperature Ta (°C)
No.6028 2/6
F
Forward Current I
(mA)
Power Dissipation P (mW)
F
C
Forward Current I
(mA)
Collector Current I (
µ
A)
C
Collector Current I (
µ
A)
Relative Collector Current (%)
SPI-315-34
Typical Characteristics
CAUTION
These numerical value show the electrical and optical characteristics of this product, and not assure this contents.
Collector-emitter Saturation Voltage vs.
Ambient Temperature Collector Dark Current vs. Ambient Temperature
10-6
0.24
VCE=10V
5
IF=10mA
IC=50µA
0.22
10-7
5
0.20
10-8
5
0.18
10-9
0.16
5
0.14
10-10
--25 0 25 50 75 100
--25 0 25 50 75 100
Ambient Temperature Ta (°C) Ambient Temperature Ta (°C)
Response Time vs. Load Resistance Test Circuit for Response Time
1000
IFP=20mA
500
tf
VCC=5V
IFP VCC
Ta=25°C
tr
100
IFP
50
Vout
tr tf
RD RL
90%
10
Vout
5
10%
1
0.1 0.5 1 5 10 50 100
Load Resistance RL (k&!)
Relative Collector Current vs.
Relative Collector Current vs. Distance PPC paper Moving Distance
120
120
IF=10mA,
VCE=5V
IF=10mA
Ta=25°C,d=1mm
VCE=5V
2
100
100
Ta=25°C
0
80
80
 +
d
1
60
60
_
1
40
40
0
+
20
20
0
0
0 1 2 3 4 5 --4 --2 0 2 4 6
Distance between sensor and Al evaporation d (mm) PPC paper Moving Distance (mm)
No.6028 3/6
CE (sat)
CEO
Collector Dark Current I
(A)
Collector-emitter Saturation Voltage V
(V)
S
Response (
µ
)
2
Relative Collector Current (%)
Relative Collector Current (%)
SPI-315-34
Pin No.
Pin connection
1. LED Anode
2. LED Cathode
1 4
C 0.6
3. Ph. Tr Collector
4. Ph. Tr Emitter
1.6
2 3
1 2 3
4
4.0
2.7
3.4
4 -- 0.6
2.6
3.3
4 -- 0.4
2 -- 0 to 20° 2 -- 0 to 20°
2.0
2 -- Ä… 10° 2 -- Ä… 10°
Tolerance : Ä… 0.2
Unit : mm
No.6028 4/6
0.4
0.5
1.5
0.5
3.5
Ä…
0.5
4 -
-
0.2
SPI-315-34
Package dimensions and Pin connection
As stated in the sttached paper. (No.6028 4/6)
A
Lot marking
Front side
Color division shall be done as shown in the drawing. (Fig. 2)
B
Year of even number : Front side
Year of odd number : Back side Fig. 2
Color Black Blue Red Green Orange Brown
Part  A January February March April May June
Part  B July August September October November December
Soldering conditions
(1) Temperature : Max. 260°C
(2) Time : Max. 3sec
(3) Clearance : Min. 1mm from the case edge. (Fig. 3)
Fig. 3
PRECAUTIONS
(1) Bending a lead should avoid. However, when bending is necessary, take care the next items.
q Bending a lead must be done before soldering.
w Bending a lead must be done in the states of fixing leads and no stress for the regin part. Because it is possible that
stress for the regin part cause troubles such as gold wire breaking and so on.
e A lead must be bend at intervals of 1mm from the case edge.
r Do not bend the same position of leads more than twice.
(2) The hole pitch of a circuit board must fit to the lead pitch.
(3) Take core the following when soldering.
q Do not heat a product under any stress (a twist and so on) to leads.
w Do not heat a product in the states of operating force to the regin part.
(4) Use the flux which contain no chlorine, have no corrosion and do not need washing.
(5) Be careful that flux or other chemicals do not attach to the luminous surface and passive surface.
No.6028 5/6
1mm
SPI-315-34
CAUTION
1. No products described or contained herein are intended for use in surgical implants, life-support systems,
aerospace equipment, nuclear power control systems, vehicles, disaster / crime-prevention equipment or
the like, and the failure of which may directly or indirectly cause injury, death or property loss.
2. Anyone purchasing any products described or contained herein for an above-mentioned use shall:
1) Accept full responsibility and indemnify and defend SANYO ELECTRIC CO.,LTD., it s affiliates,
subsidiaries and distributors or any of their officers and employees, jointly and severally, against any
and all claims and litigation and all damages, costs and expenses associated with such use.
2) Not impose any responsibility for any fault or negligence which may be cited in any such claim or
litigation on SANYO ELECTRIC CO., LTD., it s affiliates, subsidiaries and distributors or any of
their officers and employees jointly or severally.
3. Information (including circuit diagrams and circuit parameters) disclosed herein is for example only; it is not
guaranteed for mass production, SANYO believes the information disclosed herein is accurate and reliable,
but no guarantees are made or implied regarding it s use or any infringements of intellectual property rights
or other rights of third parties.
Precautionary instructions in handling gallium arsenic products
Special precautions must be taken in handling this product because it contains, gallium arsenic, which is
designated as a toxic substance by law. Be sure to adhere strictly to all applicable laws and regulations
enacted for this substance, particularly when it comes to disposal.
Manufactured by ; Tottori SANYO Electric Co., Ltd.
LED Division
5-318, Tachikawa-cho, Tottori City, 680-8634 Japan
TEL: [phone] FAX: [phone]
PS No.6028 6/6