antenna mounting

ANTENNA MOUNTING NOTES SEDAN

1.    Remove metal button covering antenna mounting hole.

2.    Loosen dress nut on antenna so that all parts are loose as shown.

3.    Feed antenna lead through mounting hole. Tilt antenna slightly away from windshield. With points of locking ears up, insert through mounting hole. Puli antenna mast up vertically until points of locking ears fit underside of cowl.

4.    Hołd antenna in vertical position, place chrome mount in position (locating tab must be behind cowl metal). Tighten dress nut securely.

CAUTION: These instructions supersede any others which may be included with this radio.

ANTENNA MOUNTING NOTES FASTBACK AND SQUAREBACK

1.    Remove metal button covering antenna mounting hole. Remove undercoating around hole on underside of fender.

2.    Drill %" hole from inside car to feed antenna cable into car as shown (see detail “A”).

3.    Loosen dress nut on antenna so that all parts are loose as shown.

4.    Feed antenna lead through mounting hole. Tilt antenna slightly away from fender. With points of locking ears up, insert through fender hole. Puli antenna mast up vertically until points of locking ears fit underside of fender.

5.    Hołd antenna in vertical position. place chrome mount in position, locating tab must be behind fender metal, and tighten dress nut securely.

6.    Insert antenna lead from fender well into car and seat grommet in hole.

7.    Dress antenna lead above hood release and dash wiring.

CAUTION: These instructions supersede any others which may be included with this radio.

MANUFACTURER‘S PART NO. 2057291-0003 -67 PRINTEO IN U.S.A.