ft150(1b)

Following the Model FT - 100, we now present the Model FT - 150 which features built - in VOX* Except for the driver and PA it is all tranfcistor and the tubę heaters may be switched off to minimize batte ry drain* Both 12 v. d* c. and 117/220 v. a. c. power supplies are buiłt-in, thus making the transceiver eąually suitable for mobile or fixed station operat i on. The incorporation of 3 crystal controlled channels makes the transceiver suitable foT,commercial operation Łn either the SSB ot AM modę (e,g, aa a C* B* main station}. As an alternative to telephone communication and where mobile operation over great diatancea are concerned, this eąuipment will prove invaluable.

SPECIF1C A TION; Freąuency rangę:

Power:

Modę of operation: Output impedance:

Fil ter:

Receiver:

Senaitivity:

Cross modulation: Crystal Generator: Dial Calibration:

Band width:

Stability:

Weight:

Size:

3. 5 - 4, 7 - 7* 5, 14 - 14. 5, 21 - 21.5, 28 - 30 MHz + 4 crystal controlled channels

150 W PEP input

ssb/am/cw 50-120 Ohma Crystal filter 3, 18 MHz

double superhet with crystal controlled front end Better than 1 uV 10 dB S/N Better than 50 dB 100 KHz

1 KHz = 4 mm. One turn on main tuning knob is 50 KHz. Readability better than 500 Hz

2, I KHz - 6 dB. 2, 5 KHz - 60 dB

500 Hz after warm-up

18 Kg

34 x 16 x 26 cm

Built-in antenna relay, voice-control, power supply 110/220 V and 12 V car battery,

The receiver can be operated up to + 6 KHz from transmitter freąuency. The transceiver is fiilly transistorized, only 1 driver and 2 PA-tubes. Driver tubę: 12 BY 7, PA-tubea 2 x 6 JM 6 parallel,

Power consumption: Receive: 10 W. Tranamit: 200 W.

NORSK RADIO SUPPLY

SINSENYEIEN 62 A, OSLO 5, TELEFON 21 54 37