G-code
GO
Rapid positioning
G1_
G2
Linear interpolation
Clockwise circular / helical interpolation
G3
G4
G10
G12
G13
G15
G16
G17
G18
G19
G20
G21
G28
G30
G28.1
G31
G40
G41
G42
Counterclockwise circular / helical interpolation
Dwell
Coordinate system origin setting
Clockwise circular pocket
Counterclockwise circular pocket
Polar Coordinate moves in GO and G1
Cancel polar Coordinate moves in GO and G1
XY piane select
XZ piane select
YZ piane select
Inch unit
Millimeter unit
Return machinę home (parameters 5161 to 5166)
Return machinę home (parameters 5181 to 5186)
Reference axis
Straight Probe
Cancel cutter radius compensation
Start cutter radius compensation left
Start cutter radius compensation right
REFERENCE G-CODE LIST
G-code
G53
G54 a G59
G61
G64
G73
G80
G81
G82
G83
G84
G85
G86
G87
G88
G89
G90
G91
G92
G92.1
G92.2
G92.3
G93
Canned cycle - drilling
Canned cycle - drilling with dwell
Canned cycle - peck drilling
Canned cycle - boring, no dwell, feed out
Canned cycle - boring, spindle stop, rapid out
Canned cycle - boring, dwell, feed out
Absolute distance modę
Incremental distance modę
Offset coordinates and set parameters
Reset G92 offset and parameter
Recall G92 from parameters
lnverse time feed modę
Feed per minutę modę Feed per reyolution modę Initial level return after canned cycles R-point level return after canned cycles
Canned cycle - right hand rigid taping (not yet implemented)
Canned cycle - back boring (not yet implemented)
Canned cycle - boring, spindle stop, manuał out
Reset G92 offset but leave parameters untouched