20
Neck opening
The rwo vertical and horlzontal edges of the panel flaps are folded twice and stitched with smali overcast stitches from the wrong side. The searns should only be a few mm. wide. The stitch is the same type as that used for hemming.
The edge of the shirt panel is tumed inward and dosely stitched to the lining from the right side using tiny overcast stitches. The lining panel is tumed inward and closely stitched to the shirt fabric from the wrong side in the same manner.
The panel opening is reinforced by stitching the shirt panel to the lining along the lower 2 cm. of the opening.
Wyszukiwarka
Podobne podstrony:
Neck opening The rwo vertical and horlzontal edges of the panel flaps are folded twice and stitched
• The following categories are designated “supernumerary”: i) PwBD (Persons with
w01 B Armour The mail ‘square’ and ventail Flap covering Yertical neck opening Dropped As mail
tmta9 Sleeved surcotes 4a continued from page 117Making up Cut and finish the neck opening. Sew the
trim Dust shielding trim Trim on front and back srewed the outside edges of plywood. Trim screwed to
Hemming The raw edges of the skirt and sleeves are tumed up twice and hemmed with an overcast stitch
The neck opening is fmished with the 1.5 cm. wide band of edging cut from the selvage of the fabric.
50989 skanuj0005 HYPERBOLA Fig. 1 The vertices and the asymptotes of the hyperbola as eonie section.
shoes&pattens6 116 Shoes and Pattens the vertical and horizontal drawstrings long out-moded in Engl
374 (19) 347 Purses along its bottom edge; seamed along each side and stitched round the top opening
autostretching0184 THE NECK 19. Yourdifficulty is: Turning your head and neck to the right while ben
więcej podobnych podstron