carvingúce
The Basic Face 1 7
•lis with a diamond burr (Fig 24). Next, drill a fairly deep hole for the pupil using a burr, enlarging it as equired. The iris can be taken up under the top lid.
The face must now be sanded, starting with 80 grit and working through to 240. Do not start with a finer ąrit or you wi II end up with tool marks showing on the • nished surface.
Thereare many finishes that can be used. I find that
• ax polish can easily clog up details on smali scalę
• ark, and I usually use a satin picture varnish from a fpray can.
Fig. 29
Fig. 27
Wyszukiwarka
Podobne podstrony:
carving?ce 2THE BASIC FACE n s E 5e ore we can progress in the carv-e rz o i expressions it is nece
carving?ce 14 The Basic Face fully measured and r :*• circles, Fig. 16. At this s
carving?ce 12 The Basic Face wedge shape shown in Fig. 8. On the side of the head draw in the
carving?ce 16The Basic Face Fig. 25 The lips are now shaped. First measure caretully from the botto
carving?ce 12 The Basic Face wedge shape shown in Fig. 8. On the side of the head draw in the
carving?ce The Basic Face I1 Measurement becomes less precise v/ith a smali scalÄ™, a cul of the chi
carving?ce Fig. 13 Fig. 14The Basic Face 13 One morÄ™ smali area is removed, Fig. 12, and the face i
carving?ce CONTENTS 1 Introduction 7 2 The Basic Face 9 3 The Expressive Face 18 4 The
carving?ce The Basic Face Study the drawing and photograph in Figs 5 and 6. The tace is expressionl
carving?ce The Basic Face 15 shaping of the upper eyel id. This wi11 be madÄ™ deeper :han occurs nat
więcej podobnych podstron