TableA

yacht AMERICA

IL/iHHa770MM BbicoTa 573 mm Maaura6 1:66

Table A

Prepare the water drains on the sides; make first 3 1,5 mm. holes, then adjust with a file. The work must be perfectly done, otherwise it is advisable to paint 7 white smali rectangles. Paint white the inside of the bulwark. Glue the decorations 74 on the bow and 75 on the transom. Make 4 2,5 mm. holes, 2 on the prow and 2 on the deck aligned with the rollers of the windlass, glue the eyelets 76 into the holes. Tie the chains 78 to the anchors, glue on the deck the 6 pieces of strip on which are laid and tied the anchors. The chains pass above the bulwark, come back to the deck through the holes on the prow, wind around the rollers of the windlass and end tied into the special holes on the deck.

Assemble the stand 79 of the model, fit the upper part to the hull shape and glue the piąte. Paint the side-lights 81, green the right one and red the left one, glue them to the shrouds of the fore mast.

Boli 1 {—lulzJE	yacht AMERICA	2606 (TADiCŁ
MILANO - ITALY	LSE.<3»AJt AT O 32A	TAv/oLaK/” A

N°	Denomina2ione	Ouantita	Mater.	Misure	Codice
74	DECORAZIONE PRUA	1C	MET	36	8096
75	DECORAZIONE POPPA	1	MET	50x16	8095
76	OCCHIELLI	4	OTN	2,5	8377
77	ANCORA	2	MET	11	8331
78	CATENA	2	OTN	1.5	0102
79	SUPPORTO	1	FG		9015
80	TARGHETTA	1	MET		8094
81	FANALE Dl POSIZIONE	1	MET	15	0406