CCI20150515002

Operating Instructions

Unlocking

Rotate the torque screw counterclockwise (figurę 3) until initiai resistance is felt. In this position, the locking balls are free of the cutting unit, but the taper interference is still holding the KM unit in the clamping unit. At this point, the bump-off pin is in position to free the cutting unit from the interference fit.

Continue to rotate the torque screw slowly until the cutting unit is no longer making face contact (figurę 4) and is released from the taper. The torque screw will stop rotating and a second resistance will be felt. CAUTION: Continuing to rotate the torque screw may damage the clamping components.

side view    FIGURĘ 3    bottom view

side view    FIGURĘ 4    bottom view

For additional 'Information, please contact your local Kennametal representative.

KM Micro    Mill/Tum    Boring Systems    Milling Cutters    lndexable Drills    Chucks and Tap Chucks    Adapters    Clamping Units - Rotating    BoringBars    Cutting Units    Clamping Units ■ Lathe

287