piraha0064
PIVOT TUBĘ SUPPORTS < 4 REOUIRED )
JIG BASE PLATĘ, ( 1 REOUIRED )
TH1S VIEW SHOWS THE LEFT SIDE REAR SUSPENSION ARM SITTING IN THE REAR SUSPENSION ARM JIG. NOTĘ THE UPRIGHT PLATĘ POSITIONED FOR THE RłGHT HAND SUSPENSION ARM. THE IDEA OF THE JIG IS TO MAKE SURĘ THAT NOT ONŁY ARE THE DIMENSIONS CORRECT, BUT BOTH RIGHT & LEFT ARMS WILL BE MIRROR IMAGES OF ONE ANOTHER.
Wyszukiwarka
Podobne podstrony:
piraha0119 300 300 BREATHER FITTING 1/4” BSP TNIS DRAWlNG SHOWS THE LEFT SIDE FU EL. TANK.
base para hacer los brazos? suspension?lantera pg 600 END VIEW THIS VIEW SHOWS THE LEFT SUSPENSION
piraha0087 PIVOT TUBĘ , 1 REOUIRED /MATERIAŁ = 25NBx3.2 PIPĘ 192 40 * — - -
piraha0107 FORD ESCORT RACK & RACK MOUNT THIS VIEW SHOWS THE ESCORT RACK & PiNION INSTALLED
piraha0120 TH1S DRAWING SHOWS THE RIGHT S1DE FUEL TANK. ALŁ DIMENSIONS ARE THE SAME AS THE
piraha0121 NOTĘ : THE FUEL TANK IS POSITIONED ON THE LEFT SIDE OF THE CHASSIS SITT1NG ON STRIPS
piraha0086 40 77777777} - *>I 7////Z//7 SIDE VIEW PIVOT TUBĘ 1 REOUIRED MATERIAŁ =
piraha0065 571 ---------- i r~r o <n 162 o 0> 1. TH 18 PLATĘ SITS FLUSH WITH CORNER
piraha0083 542 TUBĘ 1 THER CUT WITH A 27-2#mm HOLESAW OR ORIND TO FIT MATERIAŁ = 20NB x 2.3 PI
piraha0097 380 TIE ROD TUBĘ RIGHT SIDE MATERIAŁ = 15.8 x 1.6 CDS TUBĘ 1 REOUIRED 311 TIE ROD TUBĘ ŁE
Attaching an AMPS Base Platę to the Mount The AMPS mount is not included with the ragged mount. I. T
piraha0066 THREE 10mm HOLES DRILLED REAR SUSPENSION ARM JIG RIGHT & LEFT UPRIGHT PLATES 2 R
piraha0072 NOTĘ : THIS DRAWING MAY BE USED TO TRACĘ THE OUTER PLATĘ REAR SUSPENSION ARM OUTER PLATĘ&
piraha0074 i NOTĘ : THIS DRAWING MAY BE USED TO TRACĘ THE INNER PLATĘ o REAR SUSPENSION ARM INNER PL
piraha0082 51.90 21.06 ( REAR SUSPENSION ARM PIVOT TUBES 4 REQUIRED two for right arm. two for
piraha0085 WELO CRADLĘ ENDS 32 x 8 FLATBAR x 45mm LONG 4 REOUIRED « N END VIEW Ol * 16 TOP
piraha0089 STUB TUBĘ 2 REQUIRED / MATERIAŁ = 20NBx2.3 PIPĘ *0 STEERING ARMS 2 REOUłRED MATERIAŁ = 32
więcej podobnych podstron