piraha0119
300
300
BREATHER FITTING 1/4” BSP
TNIS DRAWlNG SHOWS THE LEFT SIDE FU EL. TANK. THE RIGHT SIDE FUEL TANK IS A MIRROR IMAGE OF THIS DRAWING
TOP VI£W
FUEL TANK
2 RECtUIRED
ONE RIGHT SIDE, ONE LEFT SIDE MATERIAŁ = 2mm M/S SHEET FULLY WELD
CAUTION
DO NOT ATTEMPT TO WELD TANK IF IT HAS CONTAINED FUEL
BAFFLE PLATES AS SHOWN HERE CAN BE FITTED TO THE FUEL TANK TO STOP FUEL SLOSH. TKESE PLATES CAN BE MADĘ FROM 1mm PLATĘ & TACK WELDED INSIDE THE TANK BEFORE FINISH WELDING. CUT THE BOTTOM CORNERS FROM THE BAFFLES TO ALLOW FUEL TO FLOW BETWEEN COMPARTMENTS.
FRONT VIEW
FUEL OUTLET FITTING 1/4" BSP
Wyszukiwarka
Podobne podstrony:
piraha0120 TH1S DRAWING SHOWS THE RIGHT S1DE FUEL TANK. ALŁ DIMENSIONS ARE THE SAME AS THE
mbs 014 MY BREATHING SYSTEM slow, regular respiration, even during the hardcst and most protracted e
mbs 035 MY BREATHING SYSTEM How to Expand and Contract the Thorax to its fullest Extent The thoracic
S7000106 • 4 •4 incnmac conduction syttcm ot the hrwt *AEVMBadania biochemiczne CAH + SLS • &n
100?15 4» ,‘Y1nt f*vfy p^rdL Ola M ąrru&^ui- iVłj fu
70245 ipe 09 Breath Control Brcath control is required for the best practicc of isomctric cxercise.
UNIT 8 Fig.6. The thorax during breathing: (A) inspiration, (B) cxpiration.RESPIRATION AND DISEASES
piraha0055 THIS DRAWING SHOWS THE EDGE PRODUCTS BRAKE CALI PAR INSTALLED IN THE REAR END. THE M
piraha0063 REAR SUSPENSION ARM LEFT SIDE FULLY WELD ALL JOINS NOTĘ s RIGHT SIDE ARM IS A MIRROR IMAG
piraha0064 PIVOT TUBĘ SUPPORTS < 4 REOUIRED ) JIG BASE PLATĘ, ( 1 REOUIRED ) TH1S VIEW SHOWS THE
piraha0097 380 TIE ROD TUBĘ RIGHT SIDE MATERIAŁ = 15.8 x 1.6 CDS TUBĘ 1 REOUIRED 311 TIE ROD TUBĘ ŁE
więcej podobnych podstron