suziki rm12599

suziki rm12599



REAR SUSPENSION 17-9

REAR SUSPENSION 17-9


•    Reinstall the compression adjuster assembly.

H Compression adjuster assembly:

30 N m (3.0 kgf-m, 21.5 Ib-ft)

•    Fili the rear shock absorber unit with nitrogen gas to 981 kPa (9.8 kgf/cmz, 139.5 psi).

•    Tighten the gas valve cap.

•    Reinstall the spring. (£7=17-4)



DISASSEMBLY AND INSPECTION

• Clean and dry the rear shock absorber.

• Remove the spring from the rear shock absorber. (£7=17-4)

• Turn the rebound damping force adjuster to the softest posi-

tion.

B

• Press the valve with a screwdriver to bleed out nitrogen gas.

1

(£7=17-7)

1

u

• Remove the compression adjuster assembly and drain the oil.

(£7=17-7)

Hu


Wyszukiwarka

Podobne podstrony:
Suzuki RM1259 REAR SUSPENSION 17-9 ♦    Reinstall the compression adjuster assembly.
suzuki rm25087 16-14 REAR SUSPENSION •    Reinstall the compression adjuster assembl
Suzuki RM2507 16-14 REAR SUSPENSION •    Reinstall the compression adjuster assembly
suziki rm12593 REAR SUSPENSION 17-3REAR SHOCK ABSORBERREMOVAL •    Place a błock und
suziki rm12595 REAR SUSPENSION 17-5INSPECTION •    Inspect the rear shock absorber f
suziki rm12597 REAR SUSPENSION 17-7 REAR SUSPENSION 17-7 y © from the rearOIL REPLACEMENT PROCEDURĘ
suziki rm12501 REAR SUSPENSION 17-11REASSEMBLY •    Apply the rear suspension oil to
suziki rm12503 REAR SUSPENSION 17-13SWINGARMREMOVAL •    Place a błock under the cha
suziki rm12505 REAR SUSPENSION 17-15 • Inspect the bearings, spacers and oil seals for damage. • In
suziki rm12507 REAR SUSPENSION 17-17REAR SUSPENSION LINKAGEREMOVAL •    Place a błoc
suziki rm12509 REAR SUSPENSION 17-19 •    Press fit the bearing cage with the specia
suziki rm12519 10-10 TRANSMISSION AND CRANKSHAFT INSTALLATION • Press the bearings with the special
suziki rm12527 FUEL SYSTEM 11-5CLEANING After cleaning, reassemble theo Replace the removei A WARNI
suziki rm12571 16-4 FRONT FORK AND STEERINGFRONT FORKREMOVAL •    Place the motorcyc
suziki rm12579 16-12 FRONT FORK AND STEERING •    Install the new oil seal (D with t
suziki rm12583 16-16 FRONT FORK AND STEERING • Tighten the center bolt to the specified torque. H C
suziki rm12588 FRONT FORK AND STEERING 16-21 •    Move the steering stem right and l

więcej podobnych podstron